Read Sharp AR-NC1D (serv.man12) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 017.doc
Page: 2 of 15
Configure the AR-NC1D/3D for the network.
Before the ARNC1D/3D can be installed on NetWare 5.xx, the ARNC1D / ARNC3D must
have a valid IP address and subnet mask. The following procedure uses the Sharp Digital
Copier AR250/280/285/286/335/336/405/505 series as an example. Complete the following
steps to set the IP address from the Sharp Digital Copier LCD panel.
have a valid IP address and subnet mask. The following procedure uses the Sharp Digital
Copier AR250/280/285/286/335/336/405/505 series as an example. Complete the following
steps to set the IP address from the Sharp Digital Copier LCD panel.
1. Press the Print button on the Copier.
2. From the Copier LCD panel, press the Online key to take the unit offline.
3. Press the Menu key to enter the Printer Configuration Menu.
4. Press the Network Settings key, then press the IP Address key.
5. Using the numeric keypad, enter the IP Address provided by the network
administrator.
6. Next, enter the Subnet Mask provided by the network administrator.
7. A Gateway Address may also be entered if one is used on the Network. The network
administrator should also provide this address.
8. After entering settings press the OK key multiple times to exit each menu.
9. Press the Online key to bring the Copier back online.
NOTE: The procedure for entering the IP address may vary among Digital Copier models
manufactured by Sharp. Follow the instructions provided in the Print Controller Service
manual for the specific Digital Copier that the ARNC1D / ARNC3D is being installed upon.
The MAP utility provided with the ARNC1D / ARNC3D may also be used for configuring
TCP/IP.
manufactured by Sharp. Follow the instructions provided in the Print Controller Service
manual for the specific Digital Copier that the ARNC1D / ARNC3D is being installed upon.
The MAP utility provided with the ARNC1D / ARNC3D may also be used for configuring
TCP/IP.
Setup of the NDS objects with NetWare Administrator.
This bulletin will show how to setup the AR-PB2/AR-NC1D in the SEC context of the
SHARP_TREE NDS tree. The directory structure will vary depending on the network
configuration.
SHARP_TREE NDS tree. The directory structure will vary depending on the network
configuration.
1. Login to a NetWare Directory Services tree with administration rights to the
context where the printer will be installed.
2. Locate the executable file for NetWare Administrator (SYS:\PUBLIC\
WIN32\NWADMN32.EXE for Windows 95/98 Clients). Execute by double
clicking the file in Windows Explorer.
clicking the file in Windows Explorer.
3. Locate the Novell5_Broker object on the NDS tree. Right click and choose
details.
Click on the first or last page to see other AR-NC1D (serv.man12) service manuals if exist.