AR-NB3 (serv.man7). ARNB3 (Software Setup Guide) for when installed on AR-M165 or AR-M207. - Sharp Copying Equipment User Guide / Operation Manual. Page 17

Read Sharp AR-NB3 (serv.man7) User Guide / Operation Manual online

15
INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)
1
10
Select the printer port and click the 
[Next] button.
Select [LPT1] for the printer port.
11
When asked to select the printer 
driver to install, select the appropriate 
printer driver based on whether or not 
the dual function board is installed, 
and then click the [Next] button.
If the dual function board is not installed, be sure 
to select [For standard model].
12
When the model selection window 
appears, select model name of your 
machine and click the [Next] button.
13
Click the [Yes] button.
14
When "The MFP driver installation is 
complete." appears, click the [OK] 
button.
15
If you wish to install Sharpdesk, click 
the [Utility Software] button in step 5.
If you do not wish to install Sharpdesk, go to step 
18.
16
Click the [Sharpdesk] button.
• To view information on the software, click the 
[Display Readme] button.
• Follow the on-screen instructions.
17
When the "Finish" screen appears, 
click the [Close] button.
When "Now connect the MFP interface cable to 
the PC." appears, click the [OK] button.
18
Turn off the power of the machine and 
your computer, and connect the 
machine to your computer with the 
parallel cable. (Page 44)
After connecting the machine to your computer, 
turn on the power of the machine and then start 
up your computer.
This completes the installation.
If you installed the MFP driver, see "CONFIGURING 
THE PRINTER DRIVER"
 (page 42) to configure the 
printer driver settings.
If [LPT1] does not appear, another printer or 
peripheral device is using [LPT1]. In this 
case continue the installation, and after the 
installation is finished, change the port 
setting so that the machine can use [LPT1]. 
This procedure is explained in "Another 
printer is using the parallel port (when using 
a parallel cable)" 
(page 41).
If the dual function board is not installed and 
you select the printer driver for the dual 
function board, printing will not be possible.
In Windows 95/NT 4.0, the [Utility Software] 
button does not appear.
Note
Caution
Note
• In Windows 95/NT 4.0, the [Button 
Manager] button does not appear.
• In Windows 98/Me/2000, do not select the 
[Button Manager] button (Button Manager 
is not supported when a parallel cable is 
used).
After the installation, a message prompting 
you to restart your computer may appear. In 
this case, click the [Yes] button to restart 
your computer.
Note
Note
Pegasus-E_Setup_Eng.book  15 ページ  2004年8月19日 木曜日 午後3時46分
Page of 48
Display

Click on the first or last page to see other AR-NB3 (serv.man7) service manuals if exist.