AR-NB2 (serv.man15). Network scanning setup guide for ARNB2 - Sharp Copying Equipment User Guide / Operation Manual. Page 14

The destination for Scan to Desktop is stored by the Sharp Network Scanner Tool Setup Wizard when "Network 
Scanner Tool" is installed in your computer. For this reason, there is no need to store the Scan to Desktop 
destination in the Web page. (The Network Scanner Tool is on the "Sharpdesk LT" CD-ROM that accompanied the 
Network  Expansion Kit .)
For information on Scan to Desktop system requirements, installing the Network Scanner Tool, and storing the 
destination, see "

" (p.25).

Normally your computer is stored as the destination by the method indicated above.

The following page for storing Scan to Desktop destination information appears when "Destination" is selected in the 
menu frame, followed by "Desktop". This page is used mainly by the system administrator in the following 
circumstance.

• When another machine with the network scanner function has been added to the same network, and you wish to 

perform Scan to Desktop from the added machine to a destination programmed in the previously existing machine.

Refer to "

" (p.16), and select the Scan to Desktop 

destination information that you wish to transfer to the new machine. Enter the displayed information in the same 
setting screen of the new machine. (When all information has been entered, click "Submit".)
 If there are additional destinations that you want to transfer to the new machine, repeat this procedure for each 
destination.

Note that if there are any discrepancies between the newly programmed information and the information in the host 
computer, transmission and reception may not be possible.

• For explanations of each of the items, click "Help" in the menu frame.
• The default scan mode (the scan mode for which the "Default Scan Mode" checkbox was selected when the 

settings were stored) is automatically used as the scan mode for the Scan to Desktop destination stored by the 
Network Scanner Tool. To use a different scan mode, see "

• If you entered a host name in "Hostname or IP Address", you will need to enter the DNS server or WINS server 

settings. Click "Application" in the menu frame and then click "DNS" or "WINS" in the page that appears to 
configure the corresponding settings.