Read Sharp AR-M620 (serv.man27) Service Manual online
AR-M550/M620 INSTALLATION MANUAL (AR-M550/M620) 1 - 6
F. Set developer
(1) Supply developer
1) Open the front cabinet.
2) Loosen the blue screw of the process cover, and tilt down the pro-
cess cover toward you.
3) Loosen the blue screw which is fixing the developing unit.
4) While pressing the developing unit lock lever, pull out the develop-
ing unit.
Hold the strap of the developing unit and remove the developing
unit.
unit.
5) Remove the four fixing screws of toner hopper in the developing
unit.
6) While supplying developer from the developer supply port of the
developing unit, turn the MG gear clockwise with a plus screwdriver
to supply all developer to the developing unit.
to supply all developer to the developing unit.
7) Install the toner hopper to the developing unit.
8) Insert the developing unit to the main unit and fix it with the blue
screw.
9) Close the process cover and fix it with the blue screw.
(2) Toner set
1) Remove the toner cartridge from the box, and shake it several
times horizontally.
Note: Be sure to shake the toner cartridge horizontally.
Be careful not rotate as shown in the figure below.
2) Insert the toner cartridge into the main unit insertion port as shown
below. In this case, do not turn the cartridge.
3) Insert the toner cartridge until it is locked.
2
1
Click on the first or last page to see other AR-M620 (serv.man27) service manuals if exist.