Read Sharp AR-M620 (serv.man27) Service Manual online
AR-M550/M620 INSTALLATION MANUAL (AR-M550/M620) 1 - 5
D. Lock release
(1) No. 2/3 mirror base lock release
Remove the No. 2/3 mirror base fixing screw and the label of note for
unpacking on the left side.
unpacking on the left side.
(2) Tray rotation release plate lock release
Remove the paper feed tray rotation plate fixing screw and the label of
note for tray.
note for tray.
[Tray 1, Tray 2]
[Tray 3, Tray 4]
E. Press the fusing section (upper and lower heat
rollers) and remove the process separation pawl
fixing block.
fixing block.
1) Pull the knob on the left door to pull out the left door.
2) Turn the pressing screw in the fusing section as shown in the figure
below (fully loosen it) to press the heat roller.
3) Remove the separation pawl fixing block from the process unit.
4) Replace the left door.
Lock position
1
No. 2/3 mirror base lock screw
2
Tray rotation plate fixing material
2
Click on the first or last page to see other AR-M620 (serv.man27) service manuals if exist.