Read Sharp AR-M620 (serv.man27) Service Manual online
AR-M550/M620 INSTALLATION MANUAL (AR-LC6) 2 - 4
F. Adjust the caster
1) After installing the large capacity tray to the main unit, loosen the
screws (one in the front and one in the rear) of the adjustment
caster mounting plate attached to the lower side of the large
capacity tray.
caster mounting plate attached to the lower side of the large
capacity tray.
At that time, the casters of the adjustment caster mounting plate
are brought into contact with the floor by the spring force.
are brought into contact with the floor by the spring force.
2) Tighten the screws of the caster mounting plate which were loos-
ened in procedure 1).
G. Connect the connector of the large capacity tray.
1) Remove the screw (one for each) from the connector cover on the
main unit and then remove the two connector covers.
2) Connect the large capacity tray interface harness connector and
the heating heater interface harness connector to the main unit
connector, and tighten the connector screw to fix the connector.
connector, and tighten the connector screw to fix the connector.
H. Select the paper size.
(1) Change A4 size to LT size
The factory setting of the paper size is A4. To select another size, per-
form the following procedures.
form the following procedures.
1) Pull out the large capacity tray until it stops.
2) Loosen the stopper fixing screw (1 pc.) on the lower right side of
the paper feed tray to disable the stopper function.
3) Then pull out the paper feed tray again until it stops.
F side
R side
a
b
Click on the first or last page to see other AR-M620 (serv.man27) service manuals if exist.