Read Sharp AR-M620 (serv.man19) Service Manual online
AR-M550/M620 SIMULATION 8 - 89
Operation/Procedure
1) Enter the number corresponding to the output mode with 10-key.
2) Press [START] key.
The output is delivered at the send level set with the soft SW.
When the number is entered during execution, the kind of signal can
be changed.
be changed.
When [START] key is pressed, the voice message is sent. When
[CUSTOM SETTINGS] key is pressed, it is stopped.
[CUSTOM SETTINGS] key is pressed, it is stopped.
Operation/Procedure
1) Select YES/NO of image memory clear with 10-key.
2) Press [START] key.
The SRAM image data management table and image data in the Flash
ROM area and HD (except for filing images) are cleared.
ROM area and HD (except for filing images) are cleared.
The processing status of image memory clear is displayed with "+."
66-9
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the output operation of various sound
signals of FAX. (Used to check the operation of the
sound output IC.) An output is sent at the send level
set by the soft switch. (Only when FAX is installed)
signals of FAX. (Used to check the operation of the
sound output IC.) An output is sent at the send level
set by the soft switch. (Only when FAX is installed)
Section
FAX
Item
Operation
1 NONE
Mute
11 MESSAGE 9
MESSAGE 9
2 PAUSE
Pause sound 12 MESSAGE10
MESSAGE 10
3 MESSAGE1 MESSAGE 1 13 MESSAGE11
MESSAGE 11
4 MESSAGE2 MESSAGE 2 14 MESSAGE12
MESSAGE 12
5 MESSAGE3 MESSAGE 3 15 MESSAGE13
MESSAGE 13
6 MESSAGE4 MESSAGE 4 16 MESSAGE14
MESSAGE 14
7 MESSAGE5 MESSAGE 5 17 MESSAGE15
MESSAGE 15
8 MESSAGE6 MESSAGE 6 18 ALARM
Alarm
9 MESSAGE7 MESSAGE 7 19 RINGER
Call ring
10 MESSAGE8 MESSAGE 8 20 EXT.TEL.RING
ER
External TEL
ring
ring
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
2
Same
display
display
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START. EXECUTING···.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
2
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START. EXECUTING···.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
1
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
2
Press [CUSTOM SETTINGS] key.
Press [CUSTOM SETTINGS] key.
Select 2, and press [START] key.
Select other 1, and press [START] key.
66-10
Purpose
User data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to clear all data of the image memory (memory
send/receive). The confidential data are also cleared at
the same time. (Only when FAX is installed)
send/receive). The confidential data are also cleared at
the same time. (Only when FAX is installed)
Section
FAX
Item
Data
1
YES
Image memory clear is executed.
2
NO
Clear is not executed.
Press [START] key to clear.
Same
display
display
SIMULATION 66-9
MESSAGE OUTPUT CHECK.(SOFT SW.) SELECT 1-20, AND PRESS
START. EXECUTING···.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
2
SIMULATION 66-9
MESSAGE OUTPUT CHECK.(SOFT SW.) SELECT 1-20, AND PRESS
START. EXECUTING···.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
1
SIMULATION 66-9
MESSAGE OUTPUT CHECK.(SOFT SW.) SELECT 1-20, AND PRESS
START.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
2
Press [CUSTOM SETTINGS] key.
Press [CUSTOM SETTINGS] key.
Select other 1, and press [START] key.
Select 2, and press [START] key.
SIMULATION 66-10
IMAGE MEMORY CLEAR
ARE YOU SURE?
1. YES
2. NO
1
1
SIMULATION 66-10
IMAGE MEMORY CLEAR EXECUTING···.
++++++
Click on the first or last page to see other AR-M620 (serv.man19) service manuals if exist.