Read Sharp AR-M620 (serv.man19) Service Manual online
AR-M550/M620 SIMULATION 8 - 85
2) Enter the number corresponding to the bit to be changed with 10-
key.
(Example) When the bit of 5 is to be changed, enter 5.
The set value of 1/0 is alternatively changed every time when the
target key is pressed.
target key is pressed.
3) After completion of setting of all the bits, press [START] key.
Operation/Procedure
1) Set the destination code with 10-key.
The codes other than the above are recognized as Japan.
2) Press [START] key.
3) The confirmation menu of YES/NO of clear is displayed. Select
one.
4) Press [START] key.
The soft switch (except for the adjustment values) is cleared according
to the destination selected in procedure 1).
to the destination selected in procedure 1).
NOTE: When the FAX BOX is not installed, initialization including the
adjustment value is performed. (The adjustment value is stored
in the FAX BOX.)
in the FAX BOX.)
Operation/Procedure
1) Enter the number corresponding to the memory to be checked with
10-key.
2) Press [START] key.
In the case of All, all memories are checked only once.
The error address or the data line is displayed individually.
When "repeat" is selected, the operation is repeated until the result is
"NG" or [CUSTOMSETTING" is pressed.
"NG" or [CUSTOMSETTING" is pressed.
Press [START] key.
Press [CUSTOM SETTINGS] key or [START] key.
66-2
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the FAX soft switch function data and to
set to the default. (Excluding the adjustment values.)
set to the default. (Excluding the adjustment values.)
Section
FAX
Item
Data
Japan
0 0 0 0 0 0 0 0
Finland
0 0 1 1 1 1 0 0
U.S.A.
1 0 1 1 0 1 0 1
Norway
1 0 0 0 0 0 1 0
Australia
0 0 0 0 1 0 0 1
Denmark
0 0 1 1 0 0 0 1
U.K.
1 0 1 1 0 1 0 0
Netherlands
0 1 1 1 1 0 1 1
France
0 0 1 1 1 1 0 1
Italy
0 1 0 1 1 0 0 1
Germany
0 0 0 0 0 1 0 0
Switzerland
1 0 1 0 0 1 1 0
Sweden
1 0 1 0 0 1 0 1
Austria
0 0 0 0 1 0 1 0
Newzealand
0 1 1 1 1 1 1 0
Indonesia
0 1 0 1 0 1 0 0
China
0 0 1 0 0 1 1 0
Thailand
1 0 0 1 0 0 1
Singapore
1 0 0 1 1 1 0 0
Malaysia
0 1 1 0 1 1 0 0
TW
1 1 1 1 1 1 1 0
India
0 1 0 1 0 0 1 1
Other1
1 1 1 1 1 1 0 1
Philippines
1 0 0 0 1 0 0 1
Other2
1 1 1 1 1 1 0 0
Hongkong
0 1 0 1 0 0 0 0
Ohter3
1 1 1 1 1 0 1 1
1
YES
FAX soft SW is cleared.
2
NO
Not cleared.
SIMULATION 66-1
FAX SOFT SW. SETTING. SELECT 2-120, AND PRESS START.
SIMULATION 66-1
FAX SOFT SW. SETTING. INPUT DATA No(1-8), AND PRESS
START.
OFT SW-2:
1 2 3 4 5 6 7 8
Press [START] key.
66-3
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operation of the FAX PWB memory
(read/write). (This adjustment is required when the
PWB is replaced with a new one.)
(read/write). (This adjustment is required when the
PWB is replaced with a new one.)
Section
FAX
Item
Data
Check connection wire list
NO CHECK
Not checked yet.
CHECKING
Checking
OK
Check complete OK
NG
Check complete NG
Target memory of check
MFP SRAM
MFP SRAM
SRAM
MFP FLASH
FLASH ROM
MFP OP.FLASH
MODEM EEPROM
MODEM EEPROM
MODEM SRAM (G/A)
MODEM SRAM
MODEM SDRAM
MODEM SDRAM
SIMULATION 66-2
FAX SOFT SW. CLEAR(WITHOUT ADJUSTMENT VALUE).
INPUT COUNTRY CODE, AND PRESS START.
1 2 3 4 5 6 7 8
1
SIMULATION 66-2
FAX SOFT SW. CLEAR.
ARE YOU SURE?
JAPAN
1:YES
2:NO
Click on the first or last page to see other AR-M620 (serv.man19) service manuals if exist.