AR-M550 (serv.man15). (8) Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 18

AR-M550/M620  SIMULATION  8 - 18

66

12

Used to check the output operation 
of FAX G3 mode 300bps. (Used to 
check the operation of MODEM.) An 
output is send at the send level set 
by the soft switch. (Only when FAX 
is installed)

Operation test/Check

FAX

Operation

13

Used to enter (set) the number of 
FAX dial signal output test. (The dial 
number set by this simulation is 
outputted when the dial signal output 
test is made by SIM 66-14 - 16. ) 
(Only when FAX is installed)

Setting

Data

14

Used to set the make time in the 
FAX pulse dial mode (10pps) and to 
test the dial signal output. (The dial 
number signal set by SIM 66-13 is 
outputted.) Used to check troubles in 
dialing and to check the operation. 
(Only when FAX is installed)

Setting/Operation test/
Check

FAX

Operation

15

Used to set the make time in the 
FAX pulse dial mode (20pps) and to 
test the dial signal output. (The dial 
number signal set by SIM 66-13 is 
outputted.) Used to check troubles in 
dialing and to check the operation. 
(Only when FAX is installed)

Setting/Operation test/
Check

FAX

Operation

16

Used to check the dial signal (DTMF) 
output in the FAX tone dial mode. 
(The dial number signal set by SIM 
66-13 is outputted.) The send level 
can be set to an optional level. Used 
to check troubles in dialing and to 
check the operation. (Only when 
FAX is installed)

Setting/Operation test/
Check

FAX

Operation

17

Used to check the dial signal (DTMF) 
output in the FAX tone dial mode.  
Send level: Max. Used to check the 
operation. (Only when FAX is 
installed)

Setting

FAX

Operation

18

Used to check the dial signal (DTMF) 
output in the FAX tone dial mode.  
An output is sent at the send level 
set by the soft switch. Used to check 
the operation. (Only when FAX is 
installed)

Setting

FAX

Operation

19

Used to back-up the HDD data into 
the Flash memory (optional FAX 
expansion memory: AR-MM9). (Only 
when FAX is installed)

Data transfer

FAX

Data

20

Used to read the back-up data by 
SIM 66-19 to the SRAM. (Only when 
FAX is installed)

Data transfer

FAX

Data

21

Used to print information related to 
FAX (various registrations, 
communication management, file 
management, system error 
protocol). (Only when FAX is 
installed)

Adjustment/Setup/
Operation data output/
Check (Display/Print)

FAX

Data

22

Used to adjust the handset volume. 
(Only when the FAX is installed.)

Setting

FAX

Operation

23

Used to download the FAX program. 
(Only when FAX is installed)
Not used in the market. (For 
development)

Setting

FAX

24

Used to clear the FAST memory 
data. (Only when FAX is installed)

Clear

FAX

Data

Code

Function (Purpose)

Purpose

Section

Item

Main

Sub