Read Sharp AR-M351U / AR-M451U (serv.man9) Service Manual online
AR-M351U/M451U, AR-M355U/M455U UNPACKING AND INSTALLATION 6 - 8
<2> Pull out the paper tray of the multi purpose drawer until it
stops and attach the front mounting plates using a supplied
screw for each.
Then, remove the lock of the paper tray and close the tray.
screw for each.
Then, remove the lock of the paper tray and close the tray.
<3> Reattach the paper tray of the main unit of the printer.
4) Remove the multi rear cabinet.
<1> Remove the two screws that secure the multi rear cabinet.
<2> Remove the two screws that secure the Harness protection
sheet.
<3> Remove the filament tape that secure the the power supply I/
F harness.
5) Connect the harness to the main unit of the printer.
<1> Remove the screw that fixes the harness cover of the main
unit of the printer and then slide the harness cover up to
remove it.
Process the harness cover as shown in the illustration.
remove it.
Process the harness cover as shown in the illustration.
<2> Connect the connector of the relay harness of the multi pur-
pose drawer to the connector of the PCU PWB of the main
unit of the printer.
unit of the printer.
Screw
Screw
Front mounting plate
Front
mounting plate
mounting plate
Multi rear cabinet
Screw
Screw
Harness cover
Screw
Cut out.
CN10
Connector
Click on the first or last page to see other AR-M351U / AR-M451U (serv.man9) service manuals if exist.