AR-M351U, AR-M451U (serv.man9). Unpacking and Installation - Sharp Copying Equipment Service Manual (repair manual). Page 7

Read Sharp AR-M351U / AR-M451U (serv.man9) Service Manual online

AR-M351U/M451U, AR-M355U/M455U  UNPACKING AND INSTALLATION  6 - 7
<3> Reattach the harness cover to its original position and fix it
with the removed screw.
At this time, ensure that the power supply I/F harness is
arranged as shown in the illustration.
• Fix the harness securely to the wire saddle.
6) Adjust the position of the paper guides of the upper paper tray
of the stand/paper drawer.
Refer to "Setting and adjustment" described later.
7) Carry out the off center adjustment.
C. AR-MU2
1) Turn off the main switch of the main unit of the printer.
Turn the main switch located on the front side of the main unit
to the "OFF" position.
Then, remove the power plug of the main unit from the outlet.
2) Put the main unit of the printer on the multi purpose drawer.
<1> Pull out the paper tray of the main unit until it stops and then
remove it by lifting both ends of the tray.
<2> Hold the main unit of the printer at the positions shown in the
illustration and put the main unit on the multi purpose drawer
so that the front side and the left side of the main unit are
aligned to those of the multi purpose drawer.
Caution: For installation of the main unit, it must be held by two
persons and installed without haste.
3) Connect the main unit of the printer to the multi purpose
drawer.
<1> Attach the rear mounting plates using a supplied screw for
each.
Caution: Insert the mounting plate under the desk frame.
Wire saddle
Harness cover
Power supply
I/F harness
Screw
Wire saddle
<Parts included>
Front mounting plates:
 2 pcs.
Rear mounting plates:
 2 pcs.
Screws (M4x8): 
4 pcs.
"OFF"
Front side
Rear side
Rear mounting plate
Rear mounting plate
Screw
 Screw
Tray frame
Mounting
 plate

Display

Click on the first or last page to see other AR-M351U / AR-M451U (serv.man9) service manuals if exist.

Random: