AR-M351U, AR-M451U (serv.man17). Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 73

AR-M351U/M451U, AR-M355U/M455U  SIMULATION  9 - 73

Touch the four cross marks (+) sequentially. The coordinates of
pressed positions are set.

When the coordinates setting is completed normally, the display
turns gray. When all the four points are set, the display returns to
the normal state.

When the touch panel is touched, the X and Y coordinate values
of the touched point and the coordinate values of the specified
point are displayed. The coordinate values set with SIM 65-1 are
used as the reference.

Setting of soft switches other than SW1 can be changed and
checked. 

1) Enter the soft switch number to be checked or changed with

10-key.

The current set state is displayed.

2) Enter the number corresponding to the bit to be changed with

10-key.

(Example) When the bit of 5 is to be changed, enter 5.

The set value of 1/0 is alternatively changed every time when
the target key is pressed.

3) After completion of setting of all the bits, press [START] key.

1) Set the destination code with 10-key.

The codes other than the above are recognized as Japan.

2) Press [START] key.

3) The confirmation menu of YES/NO of clear is displayed.

Select one.

4) Press [START] key. 

The soft switch (except for the adjustment values) is cleared
according to the destination selected in procedure 1).

NOTE: When the FAX BOX is not installed, initialization including

the adjustment value is performed. (The adjustment value
is stored in the FAX BOX.)

65-1

Adjustment

Used to adjust the touch panel (LCD display 
section) detection position.

Operation (Display/Operation key)

65-2

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to check the result of the touch panel (LCD 
display) detection position adjustment. (The 
coordinates are displayed.)

Operation (Display/Operation key)

66-1

Setting

Used to change and check the FAX soft switch 
functions. (Used to change and check the 
functions provided for the FAX soft switches.) 
(Only when FAX is installed)

FAX

SIMULATION 65-1

SIMULATION 65-2

400

500

600

40

100            200            300

100

140

600

180

200

Press [START] key.

Press [CUSTOM SETTINGS] key or [START] key.

66-2

Data clear

Used to clear the FAX soft switch function data 
and to set to the default. (Excluding the 
adjustment values.) (Only when FAX is installed)

FAX

Data

Japan

0 0 0 0 0 0 0 0

Finland

0 0 1 1 1 1 0 0

U.S.A.

1 0 1 1 0 1 0 1

Norway

1 0 0 0 0 0 1 0

Australia

0 0 0 0 1 0 0 1

Denmark

0 0 1 1 0 0 0 1

U.K.

1 0 1 1 0 1 0 0

Netherlands

0 1 1 1 1 0 1 1

France

0 0 1 1 1 1 0 1

Italy

0 1 0 1 1 0 0 1

Germany

0 0 0 0 0 1 0 0

Switzerland

1 0 1 0 0 1 1 0

Sweden

1 0 1 0 0 1 0 1

Austria

0 0 0 0 1 0 1 0

Newzealand

0 1 1 1 1 1 1 0

Indonesia

0 1 0 1 0 1 0 0

China

0 0 1 0 0 1 1 0

Thailand

1 0 1 0 1 0 0 1

Singapore

1 0 0 1 1 1 0 0

Malaysia

0 1 1 0 1 1 0 0

TW

1 1 1 1 1 1 1 0

India

0 1 0 1 0 0 1 1

Other1

1 1 1 1 1 1 0 1

Philippines

1 0 0 0 1 0 0 1

Other2

1 1 1 1 1 1 0 0

Hongkong

0 1 0 1 0 0 0 0

Ohter3

1 1 1 1 1 0 1 1

1

YES

FAX soft SW is cleared.

2

NO

Not cleared.

SIMULATION 66-1

FAX SOFT SW. SETTING. SELECT 2-120, AND PRESS START.

SIMULATION 66-1

FAX SOFT SW. SETTING. INPUT DATA No(1-8), AND PRESS

START.

     SOFT SW-2:

1  2  3  4  5  6  7  8