Read Sharp AR-M35 / AR-M450 (serv.man11) Service Manual online
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-5
C. Job status screen (common to print, copy, network scan, and fax modes)
This screen is displayed when the [JOB STATUS] key on the operation panel is pressed.
A job list showing the current job at the top of the job queue or a list showing completed jobs can be displayed.
The contents of the jobs can be viewed, moved up to the highest priority in the job queue or deleted from the queue.
*
"PAPER EMPTY" in the job status display
When a job status display indicates "PAPER EMPTY", the specified size paper is not loaded in any tray to run that job.
In this case, printing is suspended for that job until the required paper is loaded. Until the required paper is loaded another reserved job data will be
printed if possible.
(If paper runs out during printing, another job will not be printed.) If you wish to change the paper size because you do not have the specified size
(If paper runs out during printing, another job will not be printed.) If you wish to change the paper size because you do not have the specified size
paper, you can change the size by touching the current job key to select it and touch the [DETAIL] key described in 9
1
Job list
A job list which indicates the current job and reserved jobs or a job list which indicates completed jobs is displayed.
The icons to the left of the jobs in queue represent the job mode.
The icons to the left of the jobs in queue represent the job mode.
When a job list which indicates the current job and reserved jobs is displayed, the displayed jobs themselves are
operation keys. To cancel printing or to give a job the highest print priority, touch the relevant job key to select the job
and execute the desired operation using the keys described in 7,8, and 9
operation keys. To cancel printing or to give a job the highest print priority, touch the relevant job key to select the job
and execute the desired operation using the keys described in 7,8, and 9
2
Mode switching key
Use to switch the job list between "JOB QUEUE" and "COMPLETE".
"JOB QUEUE": Displays the list of the current job and the reserved jobs.
"COMPLETE": Displays the list of completed jobs.
"JOB QUEUE": Displays the list of the current job and the reserved jobs.
"COMPLETE": Displays the list of completed jobs.
3
[PRINT JOB] key
Use to display the print job list for all modes (print, copy, network scan, and fax).
4
[E-MAIL/FTP] key
Use to display the list of jobs that use the network for sending e-mail by SNMP protocol or sending to an ftp site or
desktop by ftp protocol.
desktop by ftp protocol.
5
[FAX JOB] key
Use to display the fax communication status and the reserved transmission job status.
6
Display switching keys
Use to switch the page of the displayed job list.
7
[STOP/DELETE] key
Use to cancel or delete the current job or delete the selected reserved job. Received fax print jobs that have been
reserved, however, cannot be deleted.
reserved, however, cannot be deleted.
8
[PRIORITY] key
If you select a job among the reserved jobs in the "JOB QUEUE" job list to which you wish to give the highest priority
and touch this key, the job will move to the highest priority reserved job.
and touch this key, the job will move to the highest priority reserved job.
9
[DETAIL] key
Use to display the detailed information of the selected job. The paper size for printing can be changed from the
specified size.This function, however, cannot be used when a fax reception print job is selected.
specified size.This function, however, cannot be used when a fax reception print job is selected.
JOB QUEUE
COPY
SHARP001
054234
COPYING
PAPER EMPTY*
WAITING
STATUS
003 / 000
PRINT JOB
E-MAIL/FTP
FAX JOB
JOB QUEUE
COMPLETE
DETAIL
PRIORITY
STOP/DELETE
003 / 000
010 / 000
1/1
SETS / PROGRESS
1
2
9
8
7
6
5
4
3
Print mode
Copy mode
Network scan mode
Fax mode (transmission job)
Fax mode (reception job)
! "#$%&
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man11) service manuals if exist.