Read Sharp AR-M300 (serv.man11) User Guide / Operation Manual online
5-24
SADDLE STITCH FINISHER
Misfeed in the saddle stitch finisher
When a misfeed occurs in the saddle stitch finisher, remove the misfed paper following the procedure below.
1
Unlatch the saddle stitch finisher and slide
it away from the printer.
it away from the printer.
2
Remove the misfed paper from the main
unit.
unit.
After removing the misfed
paper, open and close
the duplex module to
reset the jam indicator.
(step 1 or 5 on page 4-4)
paper, open and close
the duplex module to
reset the jam indicator.
(step 1 or 5 on page 4-4)
3
If misfed paper is not found in step 1, open
the top cover.
the top cover.
4
While pulling and turning roller rotating
knob B, remove the misfed paper.
knob B, remove the misfed paper.
If the misfed paper is
released by turning roller
rotating knob B, remove
it taking care not to tear
the paper.
released by turning roller
rotating knob B, remove
it taking care not to tear
the paper.
5
Close the top cover.
6
If saddle stitch was selected, open the front
cover.
cover.
7
Remove the misfed paper from the stapler
compiler.
compiler.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
8
Open the saddle stitch section cover.
9
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
Roller rotating
knob B
knob B
Click on the first or last page to see other AR-M300 (serv.man11) service manuals if exist.