AR-M300 (serv.man10). ARM300N U Operation Manual (Copier) - Sharp Copying Equipment User Guide / Operation Manual. Page 14

When copying originals which cannot be fed from the automatic document feeder such as thick originals, open the
document cover and copy the originals from the document glass

■

■

■

■

■ 1-sided copies of 1-sided originals

Original size detector

●

Set an original by aligning its corner with the tip of the
scale ( ) mark at the left rear corner of the glass as shown
in the illustrations.

ORIGINAL

A4

A4

A3

A4

A4R

2.
3.
4.

The one-sided to one-sided
mode is selected when no
icon for a two-sided mode
appears in the dashed area
on the display. If the 1-sided
to 1-sided copy mode is
already selected, steps 3 to

5 are not needed.

Ensure that paper of the same size as the
original is automatically selected. (

✼Note)

COPY RATIO

PAPER SELECT

The selected tray will be
highlighted or the message
“LOAD xxxxxx PAPER.” will
appear. If the message
appears, load paper in a
paper tray or the bypass tray
with paper of the required
size. Even if the message
above is displayed, copying
can be performed onto the
currently selected paper.

(

✼Note) The following conditions must be satisfied.

●

Originals of a standard size (11" x 17", 8-1/2" x 14", 8-1/2"
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R or
A5) are set and the auto paper select function is enabled.

TRANSPA

A4

1

X

A3

2.

3.

PLAIN

PLAIN

If originals of a size other
than the sizes above are to
be copied, manually select
the desired paper size.

Original

Copy

or B4

Original scale

mark

Original scale

mark

8

1

2

/ x

11 or A4

8

1

2

/ x

11R or A4R

8

1

2

/ x

14

11x17 or A3

or B4

5

1

2

/

8

1

2

/

x

or A5