Read Sharp AR-M300 (serv.man10) User Guide / Operation Manual online
9
NORMAL COPYING
This section describes the normal copying procedure.
Copying from the automatic document feeder
■
■
■
■
■ 1-sided copies of 1-sided originals
1
Place the originals in the document feeder tray.
(page 7)
(page 7)
2
Ensure that the 1-sided to 1-sided copy mode
is selected.
is selected.
A4
A4
A4
A3
A4
A4R
1.
2.
3.
4.
3.
4.
ORIGINAL
The one-sided to one-sided
mode is selected when no
icon for a two-sided mode
appears in the dashed area
on the display. If the 1-sided
to 1-sided copy mode is
already selected, steps 3 to
5 are not needed.
mode is selected when no
icon for a two-sided mode
appears in the dashed area
on the display. If the 1-sided
to 1-sided copy mode is
already selected, steps 3 to
5 are not needed.
3
Touch the [2-SIDED COPY] key.
2-SIDED COPY
OUTPUT
4
Touch the [1-sided to 1-sided copy] key.
The [1-sided to 1-sided] key
will be highlighted.
will be highlighted.
5
Touch the [OK] key.
OK
0
6
Ensure that paper of the same size as the
originals is automatically selected. (
originals is automatically selected. (
✼Note)
COPY RATIO
AUTO
PAPER SELECT
100
%
A4
The selected tray will be
highlighted or the message
“LOAD xxxxxx PAPER.” will
appear. If the message ap-
pears, load paper in a pa-
per tray or the bypass tray
with paper of the required
size. Even if the message
above is displayed, copying
can be performed onto the
currently selected paper.
highlighted or the message
“LOAD xxxxxx PAPER.” will
appear. If the message ap-
pears, load paper in a pa-
per tray or the bypass tray
with paper of the required
size. Even if the message
above is displayed, copying
can be performed onto the
currently selected paper.
(
✼Note) The following requirements must be satisfied.
●
Originals of a standard size (11" x 17", 8-1/2" x 14", 8-1/2"
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R or
A5) are set and the auto paper select function is enabled.
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R or
A5) are set and the auto paper select function is enabled.
TRANSPA
A4
1
X
A4
A3
1.
2.
3.
PLAIN
PLAIN
If originals of a size other
than the sizes above are to
be copied, manually select
the desired paper size.
than the sizes above are to
be copied, manually select
the desired paper size.
Original
Copy
Click on the first or last page to see other AR-M300 (serv.man10) service manuals if exist.