AR-M276 (serv.man12). Key-Operator Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 22

This chapter explains key operator programs that are used for the network scanner function. These programs can 
only be configured on models that have the network scanner function. 

The "SCANNER SETTINGS" consist of the following 
programs:

●

●

●

●

●

Use this program to change the default file format (file 
type, compression method, and pages per file) that is 
used when sending an image by Scan to E-mail, Scan 
to Desktop, or Scan to FTP. 

This program is used to set the default original type 
and exposure level for network scanner mode.
For informatin on these settings, see the operation 
manual for network scanner.

This program is used to set the default resolution for 
network scanner mode.

Use this program to select the initial screen that 
appears when the [SCAN] key is pressed to switch to 
network scanner mode, or when the [CLEAR ALL] key 
(

) is pressed in scanner mode.

Three selections are available for the initial screen:

• CONDITION SETTINGS
• ADDRESS BOOK (ABC)
• ADDRESS BOOK (GROUP)

This program is used to select the number of 
one-touch keys that are displayed in the address book 
screen and sender selection screen. Selections are 
[6], [8], and [12].

KEY OPERATOR PROGRAMS

SCANNER SETTINGS

INITIAL FILE FORMAT SETTING

INITIAL QUALITY SETTING

INITIAL RESOLUTION SETTING

OK

1/2

Each displayed one-touch key name can be 
up to 18 characters long when the number 
of displayed one-touch keys is 6 or 8. Each 
name can only be 10 characters long when 
the number of displayed one-touch keys is 
12.