Read Sharp AR-M256 (serv.man10) Specification online
AR-M256/M257/M258/M316/M317/M318/5625/5631 SPECIFICATIONS 3 - 4
F. Fusing
G. Drive
4. Additional functions, copy functions,
and expanded functions
5. Safety and environmental protection
standards
(1) Safety standards
(2) Ozone level
(3) Noise level
Developing
Dry, 2-component magnetic brush
development
development
Separation
(–) DC scorotron
Discharge
—
Cleaning
Contacted blade
Type
Heat roller
Lamp
Type
Halogen lamp
Voltage
100V: 110V/ 120V to 127V
200V: 220V to 240V
200V: 220V to 240V
Power
consumption
consumption
Main : 650W
Sub : 550W
Sub : 550W
Fusing temperature
185° (600 dpi)
Heat roller
Teflon coated roller
Pressure roller
Silicone rubber roller with re-engerized
cube
cube
Separation system
Natural separation (with pawl)
Drive section
Motor
Main motor
DC brushless motor
APS (Automatic
paper selection)
paper selection)
Yes
(No for APS by flow scan with the RSPF)
(No for APS by flow scan with the RSPF)
AMS (Automatic
magnification ratio
selection)
magnification ratio
selection)
Yes
(No for AMS by flow scan with the RSPF)
(No for AMS by flow scan with the RSPF)
Stream feeding mode
Yes
Job build function
Yes (Copy/ Scan)
Auto tray switching
Yes (No for manual paper feed)
Memory copy
Yes (1 page memory provided as standard)
Rotation copy
Yes
E-sort
Yes
XY zoom
Yes
When the OC is used: Landscape/ Portrait
25 – 400%
When the RSPF is used: Landscape/ Portrait
50 – 200%
When the OC is used: Landscape/ Portrait
25 – 400%
When the RSPF is used: Landscape/ Portrait
50 – 200%
1 set 2 copy
Yes (No for enlargement)
Binding margin
Yes
Default AB series: 0 – 20 mm (Unit of 1 mm)
Inch series: 0 – 1 inch (Unit of 1/ 8 inch)
Default AB series: 0 – 20 mm (Unit of 1 mm)
Inch series: 0 – 1 inch (Unit of 1/ 8 inch)
Edge erase
Yes
Default AB series: 0 – 20 mm (Unit of 1 mm)
Inch series: 0 – 1 inch (Unit of 1/ 8 inch)
Default AB series: 0 – 20 mm (Unit of 1 mm)
Inch series: 0 – 1 inch (Unit of 1/ 8 inch)
Center frame erase
Yes
Default AB series: 0 – 20 mm (Unit of 1 mm)
Inch series: 0 – 1 inch (Unit of 1/ 8 inch)
Default AB series: 0 – 20 mm (Unit of 1 mm)
Inch series: 0 – 1 inch (Unit of 1/ 8 inch)
Booklet copy
No
White/ black reversion
Yes
Whole surface only
(Can be inhibited with the simulation.)
Whole surface only
(Can be inhibited with the simulation.)
2 in 1/ 4 in 1
Yes (Centering provided)
Sorter
Yes
Offset function (shifter or finisher) required
Offset function (shifter or finisher) required
Mix paper feed
Yes (Only when this function is set)
Preheating
Yes (Conditions are set with the key operator
program.)
program.)
Auto power shut off
function
function
Yes (Conditions are set with the key operator
program.)
program.)
Message display
Yes
Key operator program
Yes
Printer status monitor/
Printer administration
utility
Printer administration
utility
Yes (A PCL printer board is required (TCP/
IP only). To use another protocol, an NIC
card is required.)
IP only). To use another protocol, an NIC
card is required.)
Wireless LAN support
Yes (A 3rd party part is recommended.)
Coin vendor support
Yes (Option only for the models for dealers)
Auditor support
Yes
Duplex
Yes (Standard)
Total counter
Yes
Toner save
Yes
Department
management
management
Yes (100 departments)
Job registration/ call
Yes (10 jobs)
Cover paper
Yes (Insertion and stapling must be allowed
from manual feed.)
from manual feed.)
OHP insert paper
No
Self print function
Yes (The service simulations in the machine
and the key operation list are printed.)
and the key operation list are printed.)
Built-in clock
Yes
Paper exit tray
selection
selection
(When the finisher is installed)
Machine: Copy/ FAX/ *Printer
Top tray: Copy/ *FAX
Offset tray: Printer/ *Copy
Machine: Copy/ FAX/ *Printer
Top tray: Copy/ *FAX
Offset tray: Printer/ *Copy
(When the job separator is installed)
Machine: *Copy/ Printer/ FAX
Job separator tray: Copy/ *Printer/ *FAX
Machine: *Copy/ Printer/ FAX
Job separator tray: Copy/ *Printer/ *FAX
* Default: (The above setup items for each
paper exit tray can be changed by the user.)
paper exit tray can be changed by the user.)
1 page memory
48MB
North America
Standard Europe
(Western/North)
Australia
UL60950-1
CSA C22.2
No.60950-1
21CFR (Laser)
CSA C22.2
No.60950-1
21CFR (Laser)
IEC60950-1
IEC60825-1 (Laser)
IEC60825-1 (Laser)
IEC60950-1
IEC60825-1 (Laser)
AS/NZS 60950
(FAX option)
IEC60825-1 (Laser)
AS/NZS 60950
(FAX option)
Ozone
Less than 0.02mg/m³
Dust
Less than 0.075mg/m³
Operating
25-sheet model: Less than 6.3B
31-sheet model: Less than 6.8B
31-sheet model: Less than 6.8B
On standby
25-sheet model: Less than 4.0B
31-sheet model: Less than 5.0B
31-sheet model: Less than 5.0B
Click on the first or last page to see other AR-M256 (serv.man10) service manuals if exist.