AR-M160 (serv.man23). Procedure for installation of Pegasus series download drivers. Document describes procedure for installing USB drivers prior to firmware downloading. - Sharp Copying Equipment FAQ (repair manual). Page 3

Read Sharp AR-M160 (serv.man23) FAQ online

Installation of USB download driver for Windows ’98 / ME
1.  Put the copier in to download mode. This can be done either by use of
Simulation 49-01, or by switching the copier on whilst holding down the
‘AUDIT CLEAR’ and ‘ZOOM’ keys. When the copier is in download mode,
the ‘d’ symbol will be visible in the copier’s counter display.
2. Connect an ‘A to B’ type USB cable between the PC’s USB port and the
copier’s USB1.1 port. If the copier has an optional USB2.0 port, do not
connect the USB cable to this port.
3.  Boot the PC, and on entering Windows the ‘Found new hardware’ wizard
will identify ‘DOWNLOAD’ as a new device. In the wizard, click ‘Next’.
4. Select ‘Search for the best driver for your hardware’, and then click ‘Next’.
5. Ensure that ‘Specify a location’ is ticked, and then browse to the
‘Win9xME’ folder.
6. Click ‘Next’, and then click ‘Finish’ to complete the installation.
7. Check that installation of the USB download driver was completed
successfully, by opening ‘Control panel’ and then ‘System’. Click the
‘Device manager’ tab, and expand ‘Universal Serial Bus Controllers’.
Confirm that the ‘Maintenance Tool Version 4.00 Generic USB Driver’ is
listed. It will now be possible to run the Maintenance program.
For details on using the Maintenance program to download firmware to
the copier, refer to the ‘Using the Pegasus – series Maintenance
Program’ guide.
Page of 3
Display

Download Sharp AR-M160 (serv.man23) FAQ

Found More:

AR-M160 (serv.man23) Service Manuals

Preview DownloadPagesSize
AR-M160 (serv.man14) Service Manual Service Manual 92 13.01 MB
AR-M160 (serv.man15) Circuit Diagram Service Manual 20 5.78 MB
AR-M160 (serv.man18) Operation Manual User Guide / Operation Manual 96 6.15 MB
AR-M160 ARM160-205 PCL and PS Driver for Windows 7 and Vista (64 Bit). Windows Vista Drivers 12.99 MB
AR-M160 (serv.man2) ARM160-205 PCL and PS Driver for Windows 7 and Vista (32 Bit). Windows Vista Drivers 11.69 MB
AR-M160 (serv.man3) ARM160-205 Button Manager for Windows 7 and Vista (32 and 64 Bit). Windows Vista Drivers 4.29 MB
AR-M160 (serv.man4) ARM160-205 GDI_SPLC_TWAIN for Windows 7 and Vista (32 Bit). Windows Vista Drivers 9.49 MB
AR-M160 (serv.man5) ARM160-205 GDI_SPLC_TWAIN for Windows 7 and Vista (64 Bit). Windows Vista Drivers 11.17 MB
AR-M160 (serv.man6) ARM160-205 GDI_SPLC_TWAIN for Windows 7 and Vista. Windows Vista Drivers 9.49 MB
AR-M160 (serv.man7) ARM160-205 Button manager for Windows 7 and Vista. Windows Vista Drivers 4.29 MB
AR-M160 (serv.man8) Updated GDI SPLC Twain drivers 0911a. Windows Vista Drivers 9.49 MB
AR-M160 (serv.man9) ARM160 and ARM205 GDI and SPLC GPD Driver for Windows Vista 64Bit systems. For machines connected via USB. Windows Vista Drivers 3.95 MB
AR-M160 (serv.man10) ARM160 205 Button Manager for Windows VISTA. Windows Vista Drivers 3.99 MB
AR-M160 (serv.man11) ARM160 205 GDI SPLC TWAIN Driver for Windows VISTA. Windows Vista Drivers 8.63 MB
AR-M160 (serv.man84) GDI Twain Driver. Windows 2000. Windows 2000 Drivers 8.49 MB
AR-M160 (serv.man85) SPLC Driver (With EB7). Windows 2000. Windows 2000 Drivers 5.07 MB
AR-M160 (serv.man86) GDI Driver (Non EB7). Windows 2000. Windows 2000 Drivers 4.93 MB
AR-M160 (serv.man87) ARM160 and ARM205 GDI and SPLC GPD Driver for Windows XP 64Bit systems. For machines connected via USB. Windows XP Drivers 3.95 MB
AR-M160 (serv.man88) GDI Twain Driver. Windows XP Drivers 8.49 MB
AR-M160 (serv.man89) ARM160-205 Button Manager for Windows XP. Windows XP Drivers 4.89 MB
AR-M160 (serv.man90) SPLC Driver (With EB7). Windows XP Drivers 5.07 MB
AR-M160 (serv.man91) GDI Driver (Non EB7). Windows XP Drivers 4.93 MB
AR-M160 (serv.man92) SPLC Driver (With EB7). Windows NT4 Drivers 5.07 MB
AR-M160 (serv.man93) GDI Driver (Non EB7). Windows NT4 Drivers 4.93 MB
AR-M160 (serv.man94) SPLC Driver (With EB7). Windows ME Drivers 5.07 MB
AR-M160 (serv.man95) GDI Driver (Non EB7). Windows ME Drivers 4.93 MB
AR-M160 (serv.man96) ARM160 205 SPLC and GDI Driver includes USB port driver. Windows 98 Drivers 35.93 MB
AR-M160 (serv.man97) SPLC Driver (With EB7). Windows 98 Drivers 5.07 MB
AR-M160 (serv.man98) GDI Driver (Non EB7). Windows 98 Drivers 4.93 MB
AR-M160 (serv.man99) ARM160 205 GDI SPLC TWAIN Driver for Windows VISTA. Windows Vista Drivers 8.63 MB
AR-M160 (serv.man100) ARM160-205 PCL and PS Driver for Windows 7 and Vista (64 Bit). Windows Vista Drivers 12.99 MB
AR-M160 (serv.man101) ARM160-205 PCL and PS Driver for Windows 7 and Vista (32 Bit). Windows Vista Drivers 11.69 MB
AR-M160 (serv.man102) ARM160-205 Button Manager for Windows 7 and Vista (32 and 64 Bit). Windows Vista Drivers 4.29 MB
AR-M160 (serv.man103) ARM160-205 GDI_SPLC_TWAIN for Windows 7 and Vista (32 Bit). Windows Vista Drivers 9.49 MB
AR-M160 (serv.man104) ARM160-205 GDI_SPLC_TWAIN for Windows 7 and Vista (64 Bit). Windows Vista Drivers 11.17 MB
AR-M160 (serv.man105) ARM160-205 GDI_SPLC_TWAIN for Windows 7 and Vista. Windows Vista Drivers 9.49 MB
AR-M160 (serv.man106) ARM160-205 Button manager for Windows 7 and Vista. Windows Vista Drivers 4.29 MB
AR-M160 (serv.man107) Updated GDI SPLC Twain drivers 0911a. Windows Vista Drivers 9.49 MB
AR-M160 (serv.man108) ARM160 and ARM205 GDI and SPLC GPD Driver for Windows Vista 64Bit systems. For machines connected via USB. Windows Vista Drivers 3.95 MB
AR-M160 (serv.man109) ARM160 205 Button Manager for Windows VISTA. Windows Vista Drivers 3.99 MB
AR-M160 (serv.man110) ARM160 205 GDI SPLC TWAIN Driver for Windows VISTA. Windows Vista Drivers 8.63 MB
AR-M160 (serv.man16) Parts Guide (Revised February 2010). Parts Guide 45 15.71 MB
AR-M160 (serv.man17) PWB component parts breakdown. Covers AR-M160, AR-M205, AR-SP6, AR-RP6, AR-EB7, AR-D24 and AR-D25. Parts Guide 12 571.99 KB
AR-M160 (serv.man13) AR-M160 and AR-M205 specifications Specification 3 395.1 KB
AR-M160 (serv.man34) Revision of lot number label for toner cartridge. Technical Bulletin 1 51.3 KB
AR-M160 (serv.man35) Starting Powder List (This list takes priority over information in Service Manuals). Technical Bulletin 4 66.25 KB
AR-M160 (serv.man36) Manual paper feed roller material change. Technical Bulletin 5 342.3 KB
AR-M160 (serv.man37) MODIFICATION OF PAPER FEED ROLLER HOLDER ETC. TO IMPROVE PRODUCTIVITY Technical Bulletin 5 290.28 KB
AR-M160 (serv.man38) MATERIAL CHANGE PAPER FEED SHEET Technical Bulletin 4 354.66 KB
AR-M160 (serv.man39) Maintenance Tool Updated to Version 4.28. Technical Bulletin 1 31.72 KB
AR-M160 (serv.man40) Maintenance Tool Version Upgraded to 04.26. Technical Bulletin 1 12.95 KB
AR-M160 (serv.man41) Maintenance software version upgrade (V04.22). Technical Bulletin 1 13.86 KB
AR-M160 (serv.man42) Parts Guide correction. Technical Bulletin 1 25.24 KB
AR-M160 (serv.man43) Improvement of countermeasures against jam and double feed when feeding paper from the cassette. Technical Bulletin 3 241.33 KB
AR-M160 (serv.man44) Improvement of countermeasures against jamming and double feed when feeding paper from the cassette. Technical Bulletin 2 202.85 KB
AR-M160 (serv.man45) Countermeasure against jamming when feeding paper from the cassette. Technical Bulletin 4 164.92 KB
AR-M160 (serv.man46) Countermeasure against jamming due to deformation of the manual paper feed clutch spring when feeding paper from the manual paper feeding multi unit. Technical Bulletin 4 180.14 KB
AR-M160 (serv.man47) Information of parts change (Righthand Door Assembly). Technical Bulletin 1 100.72 KB
AR-M160 (serv.man48) Strength increase of the fusing lower frame. Technical Bulletin 2 57.91 KB
AR-M160 (serv.man49) Maintenance Programme version update. Technical Bulletin 1 12.23 KB
AR-M160 (serv.man50) Countermeasure against L1-00 trouble due to detection error of the MHPS PWB Technical Bulletin 2 421.17 KB
AR-M160 (serv.man51) Strength increase of the boss for mounting the manual paper feeding latch pawl B. Technical Bulletin 3 934.83 KB
AR-M160 (serv.man52) Countermeasure against wrinkles on the copy paper or paper jam due to shrinkage of the FU felt. Technical Bulletin 2 26.84 KB
AR-M160 (serv.man53) Permanent measures against leading edge misalignment, etc. due to feed delay during duplex printing Technical Bulletin 2 49.91 KB
AR-M160 (serv.man54) Supply of a service part for countermeasure against break of the boss for mounting the manual paper feeding latch pawl B. Technical Bulletin 4 211.42 KB
AR-M160 (serv.man55) Countermeasure against double feed when feeding paper from the cassette Technical Bulletin 2 122.82 KB
AR-M160 (serv.man56) ROM version upgrade .. (7) Technical Bulletin 2 20.07 KB
AR-M160 (serv.man57) Countermeasure against double feed when feeding paper from the cassette. Technical Bulletin 2 56.62 KB
AR-M160 (serv.man58) Supply of service part for countermeasure against image distortion in the trailing edge of the back side. Technical Bulletin 3 167.36 KB
AR-M160 (serv.man59) Attachment of a high temperature Caution Label. Technical Bulletin 2 104.21 KB
AR-M160 (serv.man60) 1. Change of the MX roller, 2. Material change of the roller arm, 3. Shape change of the delivery upper guide 20, 4. Change of the fusing connecting plate, Standardisation of the parts code for the ATC sensor. Technical Bulletin 5 112.48 KB
AR-M160 (serv.man61) 1. Multi frame change, 2. Shape change of the fusing cover. Technical Bulletin 2 38.6 KB
AR-M160 (serv.man62) Countermeasure against widening of the screw hole of fixing the fuser unit to the intermediate frame. Technical Bulletin 2 483.51 KB
AR-M160 (serv.man63) Change of resistor unit to comply with RoHS. Technical Bulletin 2 27.16 KB
AR-M160 (serv.man64) Information of parts changes. 1 Fusing front PG change. 2 Cleaning blade change. 3 Roller pawl change. 4 Change of the AC switch to comply with RoHS. 5 Change of the line cable to comply with RoHS. Technical Bulletin 4 308.84 KB
AR-M160 (serv.man65) Revision of the parts guide. Technical Bulletin 3 164.08 KB
AR-M160 (serv.man66) Change of parts for the development cartridge unit. Technical Bulletin 2 31.49 KB
AR-M160 (serv.man67) Change in I F connectors for coin vendors. Technical Bulletin 1 25.39 KB
AR-M160 (serv.man68) Change of parts for the fusing unit. Technical Bulletin 2 35.6 KB
AR-M160 (serv.man69) EEPROM default value change for SPF scan position setting when installing either an ARSP6N or an ARRP6N. Technical Bulletin 1 32.79 KB
AR-M160 (serv.man70) Information of parts change (DV Box) Technical Bulletin 1 9.67 KB
AR-M160 (serv.man71) Replacement procedure for the polygon motor in the LSU unit. Technical Bulletin 4 310.84 KB
AR-M160 (serv.man72) Information of parts change. (MF Sensor Spring, Delivery Pulley 34T) Technical Bulletin 2 359.14 KB
AR-M160 (serv.man73) 009-Correction of the parts guide sections Main Drive Unit, Baseplate Unit1, Baseplate Unit2 and packing Materials and Accessories. Technical Bulletin 3 146.88 KB
AR-M160 (serv.man74) 008-Countermeasure against peeling of the fusing front PG sheet. Technical Bulletin 2 25.5 KB
AR-M160 (serv.man75) Improvement of separation of copy paper from the drum Technical Bulletin 2 106.97 KB
AR-M160 (serv.man76) Countermeasure against corner fold when duplex-copying on A3 paper Technical Bulletin 1 266.87 KB
AR-M160 (serv.man77) Supply of component parts list for the DV Units Technical Bulletin 2 158.37 KB
AR-M160 (serv.man78) Countermeasure against paper jam in the discharge section Technical Bulletin 2 632.8 KB
AR-M160 (serv.man79) Change of description for operation of User Program 24 Technical Bulletin 1 11.98 KB
AR-M160 (serv.man80) Release of firmware for supporting ARNB2 Technical Bulletin 1 7.81 KB
AR-M160 (serv.man81) Corrections to the Parts Guide for Intermediate Frame Unit, Base Plate Unit, Delivery Frame Unit, TC Unit and Cassette Unit Technical Bulletin 4 228.07 KB
AR-M160 (serv.man24) Maintenance Tool Version 4.28. Driver / Update 5.32 MB
AR-M160 (serv.man25) Maintenance Tool Version 04.26. Driver / Update 5.34 MB
AR-M160 (serv.man26) Maintenance Tool Version 04.24. Driver / Update 5.21 MB
AR-M160 (serv.man27) Maintenance Tool Version 04.22. Driver / Update 4.5 MB
AR-M160 (serv.man28) Maintenance Tool Version 04.21. Driver / Update 853.9 KB
AR-M160 (serv.man29) Integrated Maintenance Tool Version 04.20. Driver / Update 769.32 KB
AR-M160 (serv.man30) Integrated Maintenance Tool Version 0418. Driver / Update 560.17 KB
AR-M160 (serv.man31) Engine firmware update B03. (The operating margin for the occurrence of E7-11 trouble Shading trouble -White correction) has been increased.) Driver / Update 362.47 KB
AR-M160 (serv.man32) Firmware Upgrade Unified Maintenance Program (Ver 04.14) for Leopard Andromeda Pegasus Pegasus E Jaguar II series products. See enclosed Service Information pdf for information. Driver / Update 403.12 KB
AR-M160 (serv.man33) Updated Button Manager application, supporting file type selection and multi-page TIFF scanning. See included README file for information. Driver / Update 1.62 MB
AR-M160 (serv.man12) August 2004 Handy Guide 29 183.98 KB
AR-M160 (serv.man19) March 2004 FAQ 1 45.98 KB
AR-M160 (serv.man20) AR-M160 functionality specification. Includes information on copying, printing and scanning for unexpanded and expanded machines. FAQ 1 55.27 KB
AR-M160 (serv.man21) AR-M160 scanning specification. Includes information on achievable resolutions for unexpanded and expanded machines. FAQ 1 53.85 KB
AR-M160 (serv.man22) Detailed information on using the Pegasus-series Maintenance program. FAQ 1 11.84 KB
AR-M160 (serv.man82) MSDS(F01211) for Black Toner (AR-202T) Regulatory Data 4 27.23 KB
AR-M160 (serv.man83) MSDS(F31211) for Black Developer (AR-202DV) Regulatory Data 4 26.71 KB

Random: