AR-LC4. Specifications - Sharp Copying Equipment Specification (repair manual). Page 4

Read Sharp AR-LC4 Specification online

AR-LC4 SPECIFICATIONS 1 - 1
1. SPECIFICATIONS
1.1
Basic specifications
a. General
b. Case
c. Paper feed
Kind
Large capacity paper feed unit (size fixed)
Installation type
Floor type, field option
Installing position
Right side of the copier (Paper feed side)
Fixing type
Latch system (Fixed with the exclusive-use bracket on the upper side of the 
PPC paper feed side.)
Release type
Latch release, parallel shift system by the handle
Case structure
Frame assembly, box structure
Paper feed type
Pick-up roller drop and paper feed roller type
Separation type
Drive separation roller type
Transport reference
Center reference
Tray 
section
Capacity
4,000 sheets (Load 
height 428mm or 
less)
(Capacity reference value) 
64g paper 4,500 sheets
Under normal temperature and normal 
humidity, immediately after unpacking
Remaining 
quantity display
Calculated from tray-up time.
Displayed graphically in 4-step on the control panel of PPC.
Paper supply 
method
Front loading system
(The paper loading section at the front is pulled out and paper is 
loaded from above of the paper loading section.)
Jam process 
method
LCF is separated from the machine and jam paper is removed.
Size change
Inhibited
However, size change from A4/B5 to LT is allowed by a serviceman.
Size display
Not provided
Applicable 
paper
Size
Fixed sizes only
• For B5, installation of the exclusive-use end 
plate is required.
• The exclusive-use end plate for B5 is not 
included in the package.
A series: A4, B5
LT series: LT
Kinds
PPC paper (Static frictional coefficient between paper: 0.6 or less)
(Note) Tracing paper, OHP films, labels, postcards cannot be used.
Weight
64 to 209g paper
(17lbs (Pond paper) to 110lbs (index))
Page of 6
Display

Click on the first or last page to see other AR-LC4 service manuals if exist.