AR-LC1 (serv.man2). ARLC1 Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 4

Note: Before mounting the connecting plate to the large capacity

tray, be sure to remove the 2 step screws for securing the
bottom plate.

Fit the connecting plate to the lower part of the large capacity tray
and mount the plate to the position indicated with A using screw B.

Insert the connecting plate into the mounting plate of the stand while
lifting the large capacity tray a little.

After insertion, move the large capacity tray away from the copier to
check that the tray is locked.While the tray is locked, mount the
securing plate using 2 screws C.

Move the large capacity tray toward the copier and adjust the tray
and check it so that the rib of the large capacity tray is flush with the
axis of the mounting plate which has been mounted to the copier as
shown in the figure.

•

If the axis is flush with the rib:

Push the large capacity tray toward the copier.

•

If the axis is not flush with the rib:

Loosen the 2 screws of the installation adjuster mounting plate lo-
cated at the lower part of the large capacity tray and adjust as fol-
lows:

★

 If the rib is to the right of the axis 

Turn the knob clockwise to adjust.

After adjustment, tighten the 2 screws of the installation adjuster
mounting plate.

★

 If the rib is to the left of the axis 

Turn the knob counterclockwise to adjust.

After adjustment, tighten the 2 screws of the installation adjuster
mounting plate.

‚`

‚a

‚`

‚a

Screw B 

Step screws 

Connecting plate 

 Mounting plate 

Connecting plate 

Securing plate 

Screws C 

Axis

Rib

Axis

Rib

Knob

Screw

Axis

Rib

Knob

 

Screw

3 – 2