Read Sharp AR-FX8 Service Manual online
AR-FX8 MACHINE OPERATION 7 - 8
*1: Does not occur in Tiger and Dragon.
When the sub code is 08 or 30, if the communication report is OK, the report code is 00 or 16.
When the sub code is 08 or 30, if the communication report is OK, the report code is 00 or 16.
09
Not used
-
10
Not used
-
11
Polarity reversion detection
Receive
12
Invalid command reception
Receive
13
Time up (1-minute timer/6-second time)
Receive
14
PUT error
Receive
15
In V.34 mode, time up is generated when shifting from Primary to Control.
Receive
16
In V.34 mode, time up is generated when shifting from Control to Primary.
Receive
17
Command receive time-up from MFP controller
Receive
18
Not used
-
19
Not used
-
20
Polarity reversion detection
Send
21
Invalid command reception
Send
22
Fallback retry number over
Send
23
Command retry number resend over
Send
24
Time up (T5 timer)
Send
25
Time up (T5 timer) in V.34 mode
Send
26
In V.34 mode, time up is generated when shifting from Primary to Control.
Send
27
In V.34 mode, time up is generated when shifting from Control to Primary.
Send
28
Modem chip response NG *1
Send/Receive
29
Not used
-
30
A communication error is generated between MFP controller and Modem controller. (Report code is 0 or 16.)
31
DC current not detected (busy)
Send
32
Dial tone not detected (busy)
Send
33
Busy tone detection (busy)
Send
34
T0 time up (Remote machine not responding)
Send
35
T1 time up (Remote machine not responding)
Send
36
In dialing, polarity reversion detection (Remote machine not responding)
Send
37
Calling is not made (busy)<Collision detected (including CNG detection)>
Send
38
JBIG chip response NG
Send/Receive
60
In resend of document filed data, an error occurs in decoding or coding.
61
In resend of document filed data, setting to inhibit resolution conversion is made.
(The resolution after resend is set to be Enlarged.)
(The resolution after resend is set to be Enlarged.)
62
In resend of document filed data, rotation setting is made for data which cannot be rotated.
63
In resend of document filed data, data cannot be stored in HD after conversion of resolution for resend.
70
E-mail header acquisition error
71
Time out occurs during e-mail receive.
72
Receive reject occurs during e-mail receive.
80
There is no attached file in received e-mail.
81
The attached file of received e-mail is not of TIFF type which is supported.
82
The TIFF type of the attached file in received e-mail cannot be recognized. ID error
83
The TIFF type of the attached file in received e-mail cannot be recognized. Endian error
84
The TIFF type of the attached file in received e-mail cannot be recognized. Version error
85
The TIFF type of the attached file in received e-mail cannot be recognized. Tag data error
86
The TIFF type of the attached file in received e-mail cannot be recognized. Tag parameter error
87
The TIFF type of the attached file in received e-mail cannot be recognized. Header size error
88
The TIFF type of the attached file in received e-mail cannot be recognized. Data error
90
In e-mail receive, an attached file cannot be stored in memory. Memory overCannot be stored in memory.
91
In e-mail receive, an attached file cannot be stored in memory.The file size is too great to be stored in
memory.
memory.
92
In SMTP e-mail receive, an attached file cannot be stored in memory. Cannot be stored in memory.
Report code 2
Content of communication interruption
Send/Receive
Click on the first or last page to see other AR-FX8 service manuals if exist.