Read Sharp AR-FX4 Service Manual online
AR-FX4 SIMULATION - 3
Operation/procedure
Shading is performed to turn on the copy LED.
The current exposure value of "Normal character, Auto exposure"
mode is displayed.
Enter an adjustment value of 2 digits with the 10-key and press the
START key, and the entered value will be set to all the modes and the
self print will be made in the normal size.
The current exposure value of "Normal character, Auto exposure"
mode is displayed.
Enter an adjustment value of 2 digits with the 10-key and press the
START key, and the entered value will be set to all the modes and the
self print will be made in the normal size.
Exposure adjustment value table
When initializing each data: 50
Note: Executable only when the FAX is installed.
Operation/procedure
The FAX exposure level can be adjusted separately for each mode by
specifying a sub code. Since selection of Auto/Manual and Photo ON/
OFF is allowed separately for each mode, adjustments of 14 patterns
in total can be made.
specifying a sub code. Since selection of Auto/Manual and Photo ON/
OFF is allowed separately for each mode, adjustments of 14 patterns
in total can be made.
(Refer to 46-12, "Exposure adjustment table".)
Shading is performed to turn on the copy LED.
The current exposure value of the selected mode is displayed.
Enter the 2-digit adjustment value with the 10-key pad and push
START key. The entered value is set for the specified mode, and the
self print is made with the same magnification ratio for the mode.
START key. The entered value is set for the specified mode, and the
self print is made with the same magnification ratio for the mode.
Note: Executable only when the FAX is installed.
Operation/procedure
Adjust and set FAX document read magnification ratio, read and print
the document.
the document.
Note: Executable only when the FAX is installed.
Operation/procedure
After the adjustment/setting of FAX print magnification ratio, read and
print the document.
print the document.
Note: Executable only when the FAX is installed.
Operation/procedure
Set the FAX auto reduction magnification ratio (0 to 15%).
Note:Executable only when the FAX is installed.
Operation/procedure
Adjust and set FAX document read lead edge position, read and print
the document.
the document.
46
46-12
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (batch)
Mode
AE
Photo
Exposure adjustment
STD
(Standard
character)
(Standard
character)
Auto
ON
–
Manual
Auto
Auto
OFF
Individual adjustment
enable
(46-13 to 16)
Manual
Fine
(Small
character)
(Small
character)
Auto
ON
Manual
Auto
Auto
OFF
Manual
S-fine
(Fine)
(Fine)
Auto
ON
Manual
Auto
Auto
OFF
Manual
U-fine
(Super fine)
(Super fine)
Auto
ON
Manual
Auto
Auto
OFF
Manual
46-13 to 16
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (individual)
Sub code
Mode
13
STD (normal character)
14
Fine (small character)
15
S-fine (super fine)
16
U-fine (super fine)
48
48-8
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX magnification ratio adjustment (read)
Related soft
SW
SW
SW76-1 to 8, SW77-1 to 8
Adjustment magnification ratio
Adjustment
range
Adjustment
unit
OC read main scanning
magnification ratio
magnification ratio
1 – 128 –
255%
0.1%
increment
OC read sub scanning
magnification ratio
magnification ratio
SPF read main scanning
magnification ratio
magnification ratio
SPF read sub scanning
magnification ratio
magnification ratio
48-9
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX magnification ratio adjustment (print)
Related soft SW
SW78-1 to 8, SW79-1 to 8
Adjustment magnification ratio
Adjustment
range
Adjustment
unit
Main scanning magnification ratio
1 – 128 –
255%
0.1%
increment
Sub scanning magnification ratio
48-10
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX auto reduction magnification ratio (print).
Related soft SW
SW25-1 to 4
50
50-8
The adjustments on the machine side must have been normally
completed.
completed.
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX lead edge adjustment (read)
Related soft SW
SW44-1 to 4, SW44-5 to 8
SW45-1 to 4, SW45-5 to 8
SW45-1 to 4, SW45-5 to 8
Click on the first or last page to see other AR-FX4 service manuals if exist.