Read Sharp AR-FX4 (serv.man3) User Guide / Operation Manual online
PRINTING LISTS
122
Pr
in
in
ting
Lis
ts
Reception Result
Explanation
OK
Reception was completed successfully.
P. FAIL
The power was turned off or a power failure occurred.
MEM. FULL
The image memory became full during substitute reception to memory.
LENGTH OVER
Received a fax that was longer than the standard size.
SUB RX REF.
Printing is not possible and substitute reception to memory is prohibited.
CONF. ERROR
When confidential reception was attempted,
(1) The specified confidential box number was not programmed in your
(1) The specified confidential box number was not programmed in your
machine.
(2) The sending machine did not specify a confidential box number.
CONF RX CNCL
When confidential reception was attempted,
(1) The sending machine did not have its fax number programmed.
(1) The sending machine did not have its fax number programmed.
NO RX POLL
When polling was attempted,
(1) Your fax number was not programmed in your machine.
(2) Your fax number was not programmed as a polling passcode number in
(1) Your fax number was not programmed in your machine.
(2) Your fax number was not programmed as a polling passcode number in
the other machine.
(3) Your system number did not match one of the other machine's ID
numbers.
(4) Your system number did not match the other machine's system number.
RX NO POLL
When polling was attempted,
(1) The other machine did not have a polling function.
(2) The other machine did not have a document stored for memory polling.
(1) The other machine did not have a polling function.
(2) The other machine did not have a document stored for memory polling.
REL REQ FAIL
When you received a relay request transmission,
(1) The sending machine did not have its fax number programmed.
(2) The sending machine specified an auto dial number for an end receiving
machine that is not stored in your machine.
(1) The sending machine did not have its fax number programmed.
(2) The sending machine specified an auto dial number for an end receiving
machine that is not stored in your machine.
REL RQ FAIL
When you received a relay request transmission,
(1) The sending machine's fax number was not stored as a relay ID number
(1) The sending machine's fax number was not stored as a relay ID number
in your machine.
ERRORxx xxxx
Line conditions prevented the reception from taking place normally.
First 2 digits of line error code: Error code from 00 to 31
Last 4 digits of line error code: Code for use by service technicians.
First 2 digits of line error code: Error code from 00 to 31
Last 4 digits of line error code: Code for use by service technicians.
xxx-xxx OK
When serial polling ended normally,
xxx- : Indicates total number of transmissions.
xxx OK : Indicates completed transmissions.
xxx- : Indicates total number of transmissions.
xxx OK : Indicates completed transmissions.
NO SA POLLING
When F-code memory polling was attempted,
(1) The other machine did not have a F-code function.
(2) The other machine did not have an F-code programmed.
(3) The other machine did not have a document stored in the F-code memory
(1) The other machine did not have a F-code function.
(2) The other machine did not have an F-code programmed.
(3) The other machine did not have a document stored in the F-code memory
polling box.
SA POL TX ERR
When F-code polling was attempted,
(1) The sub-addresses did not match.
(2) The passcodes did not match.
(3) The other machine's F-code memory boxes were for F-code relay
(1) The sub-addresses did not match.
(2) The passcodes did not match.
(3) The other machine's F-code memory boxes were for F-code relay
request transmission or for F-code confidential transmission.
S ADD RX FAIL
When F-code reception was attempted,
(1) The sub-addresses did not match or were not programmed.
(2) The passcodes did not match or were not programmed.
(3) An F-code memory box was programmed.
(1) The sub-addresses did not match or were not programmed.
(2) The passcodes did not match or were not programmed.
(3) An F-code memory box was programmed.
JUNK FAX ERR
The Anti Junk Fax function broke the connection and generated a line error.
NGRCTFAUWMDQQMࡍࠫ㧞㧜㧜㧝ᐕ㧤㧝㧜ᣣޓ㊄ᦐᣣޓඦᓟ㧞ᤨ㧠㧢ಽ
Click on the first or last page to see other AR-FX4 (serv.man3) service manuals if exist.