AR-FX12 (serv.man7). ARFX12 Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 18

AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-6

Purpose

Adjustment

Function (Content)

Used to adjust the print density in the FAX mode 
(all modes). An adjustment with this simulation 
affects all the reading density adjustment values. 
(Only when FAX is installed)

Section
Item

Picture quality

Operation/Procedure The exposure mode to be set is selected. 

(FAX auto adjustment)

1) The current set value is highlighted on the

right side of each item. In this screen, be sure
to select "1: COPY START." (Set value: 1)

2) Set the exposure level with 10 digit key pad. 

Press P to store the set value. 
(Default: 50, set range: 0 - 99)

3) Press START, and copying is started and the

set value is stored. (Display value 1)

4) Select a paper feed tray. (Set value 2)

SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). SELECT 0-2, AND PRESS START.
0. TRAY SELECT              1. COPY START
2. FAX EXP. LEVEL

1

SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET),INPUT VALUE 0-99, AND PRESS
 START.
2. FAX EXP. LEVEL

50

SIMULATION 46-12
EXP.  LEVEL SETUP FAX (AUTO SET). SELECT 1-5, AND PRESS START. 
(FEED TRAY)
1. TRAY1  2. TRAY2  3. TRAY3  4. TRAY4  5.BPT

1

SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). NOW PRINTING.

1

50

Select other than 0 - 1, 
and press [START] key.  

Select 1, and 
press [START] key.  

Select 0, and 
press [START] key.  

Press [START] key.  

Press  [CUSTOM SETTINGS] key

Press  [CUSTOM SETTINGS] key

Press  [CUSTOM SETTINGS] key

Or copying is terminated.

Press  [START] key or 

0

Paper feed tray selection

1

Copy start (Default)

2

FAX mode exposure setup

Normal display

“NOW PRINTING”

ERROR display

DOOR OPEN.
JAM
PAPER EMPTY.

1

TRAY1

2

TRAY2

3

TRAY3

4

TRAY4

5

Manual feed

[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm  6 ページ  ２００４年１２月１５日　水曜日　午後２時２１分