Read Sharp AR-FX12 (serv.man7) Service Manual online
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-1
[6] SIMULATIONS, FAX SOFTWARE SWITCH
1. Entering the simulation mode
a. Normal mode
Enter the copy mode and perform the following procedures.
[P]
[*]
[C]
[*]
[Main
code]
[START]
[Sub
code]
[START]
b. FAX mode
Enter the copy mode and perform the following procedures.
[9]
[9]
[*]
[8]
[#]
[7]
2. Switching the simulation mode
Press [USER SETTING] to return to the code entry screen.
3. Canceling the simulation mode
Press CA key to cancel the simulation mode.
4. Simulation list
Code
Function (Content)
Purpose
Section
Item
Main Sub
22
5
Used to check the ROM version of each unit (section).
Other
Software
6
Used to print the list of adjustments and setup data
(simulations, FAX soft switches, counters).
(simulations, FAX soft switches, counters).
Adjustment, setup,
operation data output,
check (print)
operation data output,
check (print)
Data
Setup,
adjustment
data
adjustment
data
11
Used to check the use frequency of FAX. (send/receive)
(Only when FAX is installed.)
(Only when FAX is installed.)
Adjustment, setup,
operation data output,
check (display)
operation data output,
check (display)
FAX
Data
23
2
Jam/Trouble data print
24
10
Used to clear the FAX counter. (After completion of
maintenance, this counter must be cleared.)
(Only when FAX is installed.)
maintenance, this counter must be cleared.)
(Only when FAX is installed.)
Data clear
FAX
Counter
46
12
Used to adjust the print density in the FAX mode (all modes).
An adjustment with this simulation affects all the copy density
adjustment values. (Only when FAX is installed)
An adjustment with this simulation affects all the copy density
adjustment values. (Only when FAX is installed)
Adjustment
Picture
quality
quality
13
Used to adjust the print density in the FAX mode
(Standard mode). (Only when FAX is installed.)
(Standard mode). (Only when FAX is installed.)
Adjustment
Picture
quality
quality
14
Used to adjust the print density in the FAX mode
(Fine mode). (Only when FAX is installed.)
(Fine mode). (Only when FAX is installed.)
Adjustment
Picture
quality
quality
15
Used to adjust the print density in the FAX mode
(Super Fine mode). (Only when FAX is installed.)
(Super Fine mode). (Only when FAX is installed.)
Adjustment
Picture
quality
quality
16
Used to adjust the print density in the FAX mode
(Ultra Fine mode). (Only when FAX is installed.)
(Ultra Fine mode). (Only when FAX is installed.)
Adjustment
Picture
quality
quality
56
1
Data transfer
61
3
Used to adjust laser power (absolute value) in the FAX
reception mode. (Only when FAX is installed.)
reception mode. (Only when FAX is installed.)
Adjustment
Operation
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 1 ページ ２００４年１２月１５日 水曜日 午後２時２１分
Click on the first or last page to see other AR-FX12 (serv.man7) service manuals if exist.