|
|
AR-FN3 (serv.man2)
ARFN3-Service Manual
Service Manual
|
54
|
3.04 MB
|
|
|
AR-FN3
ARFN3-Specifications
Specification
|
1
|
10.66 KB
|
|
|
AR-FN3 (serv.man22)
1.Change Of The Extension Wire Guide Of the AB Series. 2.Change Of The Left Exterior 1,2, F50. 3.Addition Of Finisher Mount Cover Fixing Screws. 4.Addition Of Lower Delivery Paper Guide Reinforcing Plate. 5.Change Of The Upper Staple Tray Unit And Paper Pressing Plate Unit. 6.Version Upgrade Of The CPU Of The Inch Series. (WHITE)
Technical Bulletin
|
5
|
422.49 KB
|
|
|
AR-FN3 (serv.man21)
1.Change Of The Installation Procedure Manual. 2.Correction Of The Omissions In The Parts Guide. (WHITE)
Technical Bulletin
|
3
|
160.15 KB
|
|
|
AR-FN3 (serv.man20)
1.Improvement Of The Delivery Gate 3 Operation. 2.Pusher Change. 3.Addition Of A Clutch Protection Sheet To The Clutch 30T. (WHITE)
Technical Bulletin
|
3
|
117.09 KB
|
|
|
AR-FN3 (serv.man19)
1.Change Of The Co-packing Form Of The Screws. 2.Change Of The Rear Shaft Support Plate, Bearing etc. 3.Addition Of Stapler Light Shielding Sheet. 4.Change Of The Feeding Paper Guide Upper. 5.Change Of The Photointerrupter. (WHITE)
Technical Bulletin
|
4
|
221.08 KB
|
|
|
AR-FN3 (serv.man18)
Change Of The Delivery Gate 3. (WHITE)
Technical Bulletin
|
1
|
78.19 KB
|
|
|
AR-FN3 (serv.man17)
1.Addition Carried Out Of A Spring To The Pressure Diffusion Section Of The Staple Tray. 2.Change Carried Out In The Shape Of The Paper Delivery Lower Paper Guide. 3.Change Carried Out In The Method Of Securing The Staple Tray Harness. 4.Change Carried Out In The No 3 Paper Delivery Tray. (WHITE)
Technical Bulletin
|
3
|
213.86 KB
|
|
|
AR-FN3 (serv.man16)
1.Change Carried Out In The ROM (Version 2.2I) Of The Inch Series. 2.Change Carried Out In The No.1 And No.2 Paper Delivery Rollers. (WHITE)
Technical Bulletin
|
2
|
147.98 KB
|
|
|
AR-FN3 (serv.man15)
Unification of inch series delivery paper guide part to AB series. (YELLOW)
Technical Bulletin
|
2
|
102.21 KB
|
|
|
AR-FN3 (serv.man14)
Stapler UN pin release lever service parts settings.
Technical Bulletin
|
1
|
84.52 KB
|
|
|
AR-FN3 (serv.man13)
Improvement of paper jam udulation caused by hardening of the delivery roller
Technical Bulletin
|
2
|
50.72 KB
|
|
|
AR-FN3 (serv.man12)
Parts change information
Technical Bulletin
|
1
|
31.04 KB
|
|
|
AR-FN3 (serv.man11)
Corrections to the parts guide
Technical Bulletin
|
1
|
19.74 KB
|
|
|
AR-FN3 (serv.man10)
ROM version upgrade
Technical Bulletin
|
1
|
30.01 KB
|
|
|
AR-FN3 (serv.man9)
ARFN1N FN3 De-curl roller change
Technical Bulletin
|
1
|
31.01 KB
|
|
|
AR-FN3 (serv.man8)
Revision of the parts guide for the ARFN3
Technical Bulletin
|
1
|
47.15 KB
|
|
|
AR-FN3 (serv.man7)
Paper skewing from offset tray when first installed
Technical Bulletin
|
1
|
98.12 KB
|
|
|
AR-FN3 (serv.man6)
Revised parts guide. (The information on the bearings, which are used for gears No. 49 and No. 82, has been left out by mistake in Section 6 of the parts guide. This section was revised and the necessary information was added)
Technical Bulletin
|
1
|
36.69 KB
|
|
|
AR-FN3 (serv.man5)
Supply of staple cartridges as service part
Technical Bulletin
|
1
|
141.55 KB
|
|
|
AR-FN3 (serv.man4)
Increase in strength of the rotary shaft of the paper entry guide.
Technical Bulletin
|
2
|
187.35 KB
|
