AR-FN3 (serv.man7). Paper skewing from offset tray when first installed - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-fn3 (serv.man7) technical bulletin
Model
AR-FN3 (serv.man7)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
98.12 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Paper skewing from offset tray when first installed
File
ar-fn3-sm7.pdf
Date
Next: Sharp AR-FN3 (serv.man8) Technical Bulletin

Read Sharp AR-FN3 (serv.man7) Technical Bulletin online

AH17052002-1
Sharp Electronics (UK) Ltd., Technical Services Group
1. Model Name: 
ARFN3
2. Description:
When the finisher is first installed skewing maybe observed only from the offset tray this is
caused by either an earth strap (indicated by the yellow arrow to the right) being
incorrectly routed or a packing piece causing the plastic frame to bend slightly. This
causes the gap between the exit rollers (indicated by the red arrow to the left)  to increase
on one side.
3. Action:
If skewing is observed on installation check the gap between the exit rollers is even, if not
check the routing of the earth strap to ensure it is not pulling the rollers apart. If the earth
strap is not tight allow 2 to 4 hours for the paper guide to recover to its original position.
PAPER SKEWING FROM OFFSET TRAY WHEN FIRST INSTALLED
TECHNICAL BULLETIN
Date:
17 May 2002
Model: ARFN3
Ref.:
016
Colour: White
Page:
1 of 1
Display

Download Sharp AR-FN3 (serv.man7) Technical Bulletin

Here you can read online and download Sharp AR-FN3 (serv.man7) Technical Bulletin in PDF. AR-FN3 (serv.man7) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-FN3 (serv.man7) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

AR-FN3 (serv.man7) Service Manuals

Preview DownloadPagesSize
AR-FN3 (serv.man2) ARFN3-Service Manual Service Manual 54 3.04 MB
AR-FN3 (serv.man3) ARFN3-Parts Guide Parts Guide 35 3.09 MB
AR-FN3 ARFN3-Specifications Specification 1 10.66 KB
AR-FN3 (serv.man22) 1.Change Of The Extension Wire Guide Of the AB Series. 2.Change Of The Left Exterior 1,2, F50. 3.Addition Of Finisher Mount Cover Fixing Screws. 4.Addition Of Lower Delivery Paper Guide Reinforcing Plate. 5.Change Of The Upper Staple Tray Unit And Paper Pressing Plate Unit. 6.Version Upgrade Of The CPU Of The Inch Series. (WHITE) Technical Bulletin 5 422.49 KB
AR-FN3 (serv.man21) 1.Change Of The Installation Procedure Manual. 2.Correction Of The Omissions In The Parts Guide. (WHITE) Technical Bulletin 3 160.15 KB
AR-FN3 (serv.man20) 1.Improvement Of The Delivery Gate 3 Operation. 2.Pusher Change. 3.Addition Of A Clutch Protection Sheet To The Clutch 30T. (WHITE) Technical Bulletin 3 117.09 KB
AR-FN3 (serv.man19) 1.Change Of The Co-packing Form Of The Screws. 2.Change Of The Rear Shaft Support Plate, Bearing etc. 3.Addition Of Stapler Light Shielding Sheet. 4.Change Of The Feeding Paper Guide Upper. 5.Change Of The Photointerrupter. (WHITE) Technical Bulletin 4 221.08 KB
AR-FN3 (serv.man18) Change Of The Delivery Gate 3. (WHITE) Technical Bulletin 1 78.19 KB
AR-FN3 (serv.man17) 1.Addition Carried Out Of A Spring To The Pressure Diffusion Section Of The Staple Tray. 2.Change Carried Out In The Shape Of The Paper Delivery Lower Paper Guide. 3.Change Carried Out In The Method Of Securing The Staple Tray Harness. 4.Change Carried Out In The No 3 Paper Delivery Tray. (WHITE) Technical Bulletin 3 213.86 KB
AR-FN3 (serv.man16) 1.Change Carried Out In The ROM (Version 2.2I) Of The Inch Series. 2.Change Carried Out In The No.1 And No.2 Paper Delivery Rollers. (WHITE) Technical Bulletin 2 147.98 KB
AR-FN3 (serv.man15) Unification of inch series delivery paper guide part to AB series. (YELLOW) Technical Bulletin 2 102.21 KB
AR-FN3 (serv.man14) Stapler UN pin release lever service parts settings. Technical Bulletin 1 84.52 KB
AR-FN3 (serv.man13) Improvement of paper jam udulation caused by hardening of the delivery roller Technical Bulletin 2 50.72 KB
AR-FN3 (serv.man12) Parts change information Technical Bulletin 1 31.04 KB
AR-FN3 (serv.man11) Corrections to the parts guide Technical Bulletin 1 19.74 KB
AR-FN3 (serv.man10) ROM version upgrade Technical Bulletin 1 30.01 KB
AR-FN3 (serv.man9) ARFN1N FN3 De-curl roller change Technical Bulletin 1 31.01 KB
AR-FN3 (serv.man8) Revision of the parts guide for the ARFN3 Technical Bulletin 1 47.15 KB
AR-FN3 (serv.man6) Revised parts guide. (The information on the bearings, which are used for gears No. 49 and No. 82, has been left out by mistake in Section 6 of the parts guide. This section was revised and the necessary information was added) Technical Bulletin 1 36.69 KB
AR-FN3 (serv.man5) Supply of staple cartridges as service part Technical Bulletin 1 141.55 KB
AR-FN3 (serv.man4) Increase in strength of the rotary shaft of the paper entry guide. Technical Bulletin 2 187.35 KB

Random: