Read Sharp AR-FN2 (serv.man13) User Guide / Operation Manual online
1
Introduction
The copier has two different finisher modes: one sorts copies into sets
matching the sequence of the originals and the second groups copies by
original. When an optional finisher (AR-FN2) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or
group of copies can be stacked offset from the previous set.
matching the sequence of the originals and the second groups copies by
original. When an optional finisher (AR-FN2) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or
group of copies can be stacked offset from the previous set.
NOTE:
The AR-FN2 finisher is optional equipment for the AR-280/AR-285/
AR-335 Copiers. This manual describes only the features of the
AR-FN2 finisher. For general information on the copier features, see the
Operation Manual of the copiers.
The AR-FN2 finisher is optional equipment for the AR-280/AR-285/
AR-335 Copiers. This manual describes only the features of the
AR-FN2 finisher. For general information on the copier features, see the
Operation Manual of the copiers.
AB series (metric) and inch series references
Both specifications are quoted where applicable.
●
The inch series specifications are quoted in brackets.
For example:
Page 2 ..... A4 (8-1/2" x 11")
For example:
Page 2 ..... A4 (8-1/2" x 11")
Paper feed area cover
Top cover
Top tray
Offset tray
Stapler cover
Staple cartridge
PART NAMES
CAUTION
Do not put pressure on the finisher or subject it to undue force.
Click on the first or last page to see other AR-FN2 (serv.man13) service manuals if exist.