AR-FN1 (serv.man26). 1.Measure To Improve The Performance Of The Stapler Unit. 2.Measure To Alleviate Problems Which Occurred In The Stack During Paper Delivery Operations Of The Tray 3 Unit. (WHITE) - Sharp Copying Equipment Technical Bulletin (repair manual). Page 8

Read Sharp AR-FN1 (serv.man26) Technical Bulletin online

ARE149
Sharp Electronics (UK) Ltd., Technical Services Group
ARFN1
Installing the printer board
1.Change the Fn1 ROM
2. Replace the connecting gear and remove the 2 transport springs
Before 5.6 N production perform the following procedure
After 7N production it is not required.
1. Remove the 2 transport springs which are attached to the exit area paper guide. And store
the 2 moved transport springs by hanging them on the exit unit front frame.
2. Replace the connecting gear at the rear
side of the exit unit as shown in the
illustration.
Page of 9
Display

Click on the first or last page to see other AR-FN1 (serv.man26) service manuals if exist.

Random: