Read Sharp AR-FN1 (serv.man26) Technical Bulletin online
2. Measure to alleviate problems which occurred in the stack during paper
delivery operations of the tray 3 unit.
1.Model Name:
ARFN1.
2.General:
There have been problems of stack errors occurring caused by the rear edge of the copy
paper remaining on the paper delivery belt upper during copy paper delivery operations to
the face-down tray 3 while the printer is connected. As a measure to alleviate this problem,
the action described below has been carried out.
paper remaining on the paper delivery belt upper during copy paper delivery operations to
the face-down tray 3 while the printer is connected. As a measure to alleviate this problem,
the action described below has been carried out.
3.Description:
A change has been carried out in the ROM software of the FIN main PWB. A change has
also been carried out in the gear of the paper delivery reversion unit of the machine, and in
the one-way clutch gear. Please refer to the description provided below for details
concerning the content of the change that has been carried out in the ROM.
also been carried out in the gear of the paper delivery reversion unit of the machine, and in
the one-way clutch gear. Please refer to the description provided below for details
concerning the content of the change that has been carried out in the ROM.
Printer Mode ROM
•
Overseas SEEC market destinations (for machines without a decurler installed at the
paper insertion opening.)
paper insertion opening.)
V1.06 ® 1.11
[Description of Change]
- The ON timing of the reversion pressure release solenoid has been changed to the 1-
bin type timing of the paper delivery UN of the machine, without respect to the
conditions of the paper delivery UN itself. (This action has been carried out as a
measure to prepare for the addition of the one-way gear to the paper delivery UN.)
- A change has been carried out so that the paper delivery motor has variable speeds
during printer mode (tray 3 face down specifications) so that the finisher transport
speed for copy paper discharge from tray 3 can be set to high speed. (WLT, LG, FC. A3,
B4, A4R copy paper sizes are carried out at variable speed, other copy paper sizes are
carried out at high speed.)
bin type timing of the paper delivery UN of the machine, without respect to the
conditions of the paper delivery UN itself. (This action has been carried out as a
measure to prepare for the addition of the one-way gear to the paper delivery UN.)
- A change has been carried out so that the paper delivery motor has variable speeds
during printer mode (tray 3 face down specifications) so that the finisher transport
speed for copy paper discharge from tray 3 can be set to high speed. (WLT, LG, FC. A3,
B4, A4R copy paper sizes are carried out at variable speed, other copy paper sizes are
carried out at high speed.)
•
Overseas market destinations (for machines currently in production, and for
machines previously manufactured for overseas AB series market destinations).
V2.00, V2.10 ® V2.13
[Description of Change]
- A change has been carried out so that the paper delivery motor has variable speeds
during printer mode (tray 3 face down specifications) so that the finisher transport
speed for copy paper discharge from tray 3 can be set to high speed. (WLT, LG, FC. A3,
B4, A4R copy paper sizes are carried out at variable speed, other copy paper sizes are
carried out at high speed.)
speed for copy paper discharge from tray 3 can be set to high speed. (WLT, LG, FC. A3,
B4, A4R copy paper sizes are carried out at variable speed, other copy paper sizes are
carried out at high speed.)
ARE149
Sharp Electronics (UK) Ltd., Technical Services Group
Click on the first or last page to see other AR-FN1 (serv.man26) service manuals if exist.