Read Sharp AR-F13 (serv.man2) Service Manual online
AR-F13 SIMULATIONS 10-1
[10] SIMULATIONS
1. Finisher/Saddle unit
2. Puncher unit (option)
Error
Condition
Timing of detection
Operation
Resetting
Staple absent
The stapler is not set.
Monitoring at all times The staple/fold motor (FFSM) and the
slide motor (FSM) will stop.
Set the stapler.
Staple absent
The staple cartridge has run out of
staples.
staples.
Monitoring at all times Normal operation will continue;
however, operation is subject to
instructions from the host machine.
instructions from the host machine.
Replace the staple
cartridge;
or, set it correctly.
cartridge;
or, set it correctly.
Mixed sheets
Sheets of different sizes are deposited
in the compartment.
in the compartment.
When a sheet of a
different size is placed.
different size is placed.
The sheet will be aligned based on
maximum size width and delivered as a
stack.
maximum size width and delivered as a
stack.
-
Overstacking for
stapling
stapling
The number of sheets in the
compartment has exceeded the limit
imposed on stapling.
compartment has exceeded the limit
imposed on stapling.
When an extra sheet is
placed.
placed.
The sheets will be delivered with
stapling.
stapling.
-
Stack tray
overstacking
overstacking
The number of sheets deposited on the
delivery tray has exceeded the limit
imposed on the tray (sheets, sets).
delivery tray has exceeded the limit
imposed on the tray (sheets, sets).
When an extra sheet is
placed.
placed.
Normal operation will continue.
Remove the sheets
from the delivery tray.
from the delivery tray.
Saddle overstacking Remove the stack from the bind tray.
More than 10 stacks are deposited on
the folded stack tray.
the folded stack tray.
When an extra sheet is
placed.
placed.
Normal operation will continue.
Remove the stack from
the bind tray.
the bind tray.
Error
Condition
Timing of detection
Operation
Resetting
Waste case full
The amount of waste paper in the
waste case has reached the limit.
waste case has reached the limit.
During punching.
Normal operation will continue.
Remove the waste
paper from the waste
case.
paper from the waste
case.
Excess water
The amount of waste paper in the
waste case has exceeded the limit.
waste case has exceeded the limit.
During punching.
Punching will be disabled.
Remove the waste
paper from the water
case.
paper from the water
case.
Click on the first or last page to see other AR-F13 (serv.man2) service manuals if exist.