Read Sharp AR-DU3 Service Manual online
AR-DU3/DU4/TE3 ADJUSTMENTS-2
2. Aper guide position adjustment in the
manual paper feed section
(With the AR-350M/450M, DM-3551/4551,
a scanner installed)
(With the AR-350M/450M, DM-3551/4551,
a scanner installed)
A.Width detection level adjustment in simulations
1) Enter the sub code of SIM 40-7, and the menu below will be
displayed.
SIM 40-7: Menu display of width detection level adjustment
2) Under the above state 1), press [1] key and then [START] key, and
the menu below will be displayed.
*
Enter the value of "MAX" specified on the label with [0] - [9] keys.
After entering the value of "MAX," press [CUSTOM SETTINGS] key,
and menu 1) will be displayed.
3) Under the state 1), press [2] key and then [START] key, and the
menu below will be displayed.
*
Enter the value of "P1" specified on the label with [0] - [9] keys.
After entering the value of "P1," press [CUSTOM SETTINGS] key,
After entering the value of "P1," press [CUSTOM SETTINGS] key,
and menu 1) will be displayed.
4) Under the state 1), press [3] key and then [START] key, and the
menu below will be displayed.
*
Enter the value of "P2" specified on the label with [0] - [9] keys.
After entering the value of "P2," press [CUSTOM SETTINGS] key,
After entering the value of "P2," press [CUSTOM SETTINGS] key,
and menu 1) will be displayed.
5) Under the state 1), press [3] key and then [START] key, and the
menu below will be displayed.
*
Enter the value of "MIN" specified on the label with [0] - [9] keys.
After entering the value of "MIN," press CUSTOM SETTINGS key,
and menu (1) will be displayed.
B. Width detection level adjustment in simulations
1) Enter the sub code of SIM 40-2, and the menu below will be
displayed.
SIM 40-2: Menu display of width detection level adjustment
2) Under the above state 1), move the manual paper feed guide F to the
MAX position and press [1] key and then [START] key, and the menu
below will be displayed. Check that "COMPLETE" is displayed, and
below will be displayed. Check that "COMPLETE" is displayed, and
press [CUSTOM SETTING] key to return to the menu 1).
3) Move the manual paper feed guide F to the size mark of A4R on the
manual paper feed tray upper. Press [2] key and then [START] key,
and the menu below will be displayed. Check that "COMPLETE" is
displayed, and press [CUSTOM SETTINGS] key to return to the
displayed, and press [CUSTOM SETTINGS] key to return to the
menu 1).
4) Move the manual paper feed guide F to the size mark of A5R on the
manual paper feed tray upper. Press [3] key and then [START] key,
and the menu below will be displayed. Check that "COMPLETE" is
displayed, and press [CUSTOM SETTINGS] key to return to the
displayed, and press [CUSTOM SETTINGS] key to return to the
menu 1).
5) Move the manual paper feed guide F to the MIN position. Press [4]
key and then [START] key, and the menu below will be displayed.
Check that "COMPLETE" is displayed, and press [CUSTOM
SETTINGS] key to return to the menu 1).
SIMULATION 40-7
BYPASS TRAY VALUE SETTING.SELECT 1-4,AND PRESS START.
1.MAX.POSITION
BYPASS TRAY VALUE SETTING.SELECT 1-4,AND PRESS START.
1.MAX.POSITION
:
2.POSITION 1
:
3.POSITION 2
:
4.MIN.POSITION
:
815
72
380
710
804
710
804
SIMULATION 40-7
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
1.MAX.POSITION
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
1.MAX.POSITION
80
SIMULATION 40-7
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
2.POSITION 1
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
2.POSITION 1
385
SIMULATION 40-7
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
3.POSITION 2
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
3.POSITION 2
720
SIMULATION 40-7
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
4.MIN.POSITION
BYPASS TRAY VALUE SETTING.INPUT VALUE 0-1023,AND PRESS START.
4.MIN.POSITION
815
SIMULATION 40-2
BYPASS TRAY ADJUSTMENT.SELECT 1-4,AND PRESS START.
1.MAX.POSITION
2.POSITION 1
3.POSITION 2
4.MIN.POSITION
BYPASS TRAY ADJUSTMENT.SELECT 1-4,AND PRESS START.
1.MAX.POSITION
2.POSITION 1
3.POSITION 2
4.MIN.POSITION
1
SIMULATION 40-2
BYPASS TRAY ADJUSTMENT.
MAX.POSITION...COMPLETE
BYPASS TRAY ADJUSTMENT.
MAX.POSITION...COMPLETE
SIMULATION 40-2
BYPASS TRAY ADJUSTMENT.
POSITION 1...COMPLETE
BYPASS TRAY ADJUSTMENT.
POSITION 1...COMPLETE
SIMULATION 40-2
BYPASS TRAY ADJUSTMENT.
POSITION 2...COMPLETE
BYPASS TRAY ADJUSTMENT.
POSITION 2...COMPLETE
SIMULATION 40-2
BYPASS TRAY ADJUSTMENT.
MIN.POSITION...COMPLETE
BYPASS TRAY ADJUSTMENT.
MIN.POSITION...COMPLETE
Click on the first or last page to see other AR-DU3 service manuals if exist.