Read Sharp AR-CF1 (serv.man7) Service Manual online
6-52
CHAPTER 6 MECHANICAL CONSTRUCTION
Figure 6-428
Note: Put together both marks at the rack and
pinion as the right figure shows when
installing the paper width detection
volume.
installing the paper width detection
volume.
Figure 6-430
2.
Tray guide adjustment
When the tray guide is not placed at the
proper position, do the following operations to
adjust it.
1) Remove the tray lower guide.
2) Loosen 2 screws [1], and tuck the latch of
adjust it.
1) Remove the tray lower guide.
2) Loosen 2 screws [1], and tuck the latch of
the tray guide and adjust the guide looking
at the marks [3].
at the marks [3].
F.
Notes for Installing
1.
Notes for installing the pickup
drive gear
drive gear
1) When installing the gear [A], put
쩹 into
the concave portion
쩸 of the gear [A].
2) When installing the gear [B], to put the gear
[A] into the concave portion
쩺 of the gear
[B] and gear [C] into the portion
쩻 of it.
Also, put the leaf spring [D] on the portion
쩼 of the gear [B].
Figure 6-429
[1]
[2]
[1]
[3]
[C]
[B]
[D]
[A]
4
3
5
2
1
Click on the first or last page to see other AR-CF1 (serv.man7) service manuals if exist.