Read Sharp AR-CF1 (serv.man7) Service Manual online
6-48
CHAPTER 6 MECHANICAL CONSTRUCTION
6) Remove 4 screws [14], and take off the trans-
port motor [15] with the bracket.
2.
Sensors
1) Remove the front cover, and take off the feed
motor, main board and transport motor.
2) Remove 3 connectors [1] and release the
harness clamp [2]. Then remove 2 screws
[3], and take off the joint sensor [4] and joint
switch [5] with the bracket [6].
[3], and take off the joint sensor [4] and joint
switch [5] with the bracket [6].
3) Open the transport cover 1 [7], disconnect 1
connector for each sensor, and take off the
transport cover 1 open/close sensor 1 [8] and
separation sensor [9].
transport cover 1 open/close sensor 1 [8] and
separation sensor [9].
Figure 6-418
Figure 6-417
Figure 6-416
[14]
[14]
[15]
[1]
[2]
[4]
[1]
[3]
[3]
[6]
[5]
[7]
[9]
[8]
Click on the first or last page to see other AR-CF1 (serv.man7) service manuals if exist.