AR-C260 (serv.man8). (5) Unpacking Installation - Sharp Copying Equipment Service Manual (repair manual). Page 2

AR-C260/C260M  UNPACKING AND INSTALLATION  5 - 2

If dust enters the machine, it may cause dirty copy and a paper jam,
resulting in a shortened lifetime.

If the machine is installed under the rays of the sun, the exterior of the
machine may be discolored and abnormal copies may be produced.

Do not install the machine at a place where there are gases and chem-
icals. Especially be careful to avoid installation near a diazo-type
copier, which produces ammonium gas. 

Copy quality may be adversely affected and a trouble may be caused.

Avoid installation near a machine which produces vibrations.

If vibrations are applied to the copier machine, copy images may be
deflected and a trouble may be caused.

It is recommendable to use a forklift for bringing in the machine for
safety.

If no forklift is available, man-power of four persons is required. The
machine is considerably heavy, and requires safety precautions for
delivery and installation.

Transit of the machine must be made in packed condition to the install-
ing place.

Remove the packing materials prior to installation in the ofice environ-
ment.

1) Remove the PP band. 

2) Remove the top case.

3) Remove the internal packing pads and the items packed together

with the machine. 

4) Remove the machine from the package.

No.

Content

Method

1

Implements, facility, 
and man power

Use a forklift. (If no forklift is available, 
manpower of four persons is required.) 

2

Delivery

Transit must be made in packed 
condition.