AR-C260 (serv.man33). AR-C260 Key Operators guide - Sharp Copying Equipment User Guide / Operation Manual. Page 6

This section explains general key operator programs that are common to the copy, printer, and network scanner
functions.

■ Account control

The program "Auditing mode" is used to set the
internal auditor function. The other programs of this
category can be set only if the auditing mode has
been enabled.

When the auditing mode is enabled, up to 200 five-
digit account numbers can be registered and
assigned to users. An assigned account number
must be entered for access to printing.

Touch the [AUDITING MODE] key to display the
following screen.

● When the [COLOUR & B/W] key or the

[COLOUR ONLY] key is touched, the key is
highlighted and checkmarks automatically
appear in the checkboxes on the right-hand side
of the screen (this is the factory default setting).

● Auditing mode is enabled for functions that have

checkmarks in the checkboxes on the right-hand
side of the screen. If you need to disable auditing
mode for a function, touch its checkbox to
remove the checkmark.

● If you wish to disable auditing mode for all

functions, touch the [DISABLE] key. The
checkmarks will be removed from the
checkboxes at right and the checkboxes will be
greyed out.

The following functions cannot be used unless
auditing mode is enabled and an account number
is programmed.
● Total pages per account
● Resetting account
● Account limit setting

An account number must be entered for access to
the machine to enable scanning for copying or
network scanning.

This program is used to display or print the total
number of prints of each account. Misfed paper is
not counted.
When using the network scanner feature, the
number of transmitted pages can also be displayed
or printed.

Touch the [TOTAL PAGES PER ACCOUNT] key
to display the following screen.

● Printing out all accounts

Touch the [PRINT] key to print out the total
pages of all accounts. If the [CANCEL] key
appears, this key can be touched to cancel
printing.

To enable Auditing mode, program an account
number as explained in "Account number control"
on page 7.

KEY OPERATOR PROGRAMS

COPIES

PRINTS

OK

SCAN

AUDITING MODE

DISABLE

COLOUR ONLY

COLOUR & B/W

Display when [COLOUR & B/W] is selected
In the screens from here through page 6 that are
used in the explanations of the programs for
resetting account and total pages per account, the
[COLOUR & B/W] setting in [AUDITING MODE (at
left)] is selected. The account numbers appear in
ascending order, with one account number
(showing the total pages and limit of the account)
appearing per screen. When [COLOUR ONLY] is
selected, two account numbers appear per
screen.)
When the 

 key or 

 key is displayed, you can

touch either key to display the following account
groups.

KEY OPERATOR PROGRAMS

OK

TOTAL PAGES PER ACCOUNT

12345

B/W

(MAXIMUM)

654,321

(666,666)

654,321

(666,666)

654,321

(666,666)

654,321

(666,666)

654,321

(666,666)

654,321

(666,666)

654,321

(666,666)

COLOUR

(MAXIMUM)

COPIES

PRINTS

S.COLOUR

PRINT

ACCOUNT SEARCH

SCAN

100

200

ACCOUNT
NUMBER

sec_whale_keyope.fm  5 ページ  ２００２年１１月１３日　水曜日　午後６時０分