Read Sharp AR-C260 (serv.man12) Service Manual online
AR-C260/C260M SIMULATION 9 - 46
(Items to be set)
(Items to be set)
(Items to be set)
46
-15
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the gamma and density. (Monochrome
mode)
mode)
Section
Image process (ICU)
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the adjustment point with the scroll key.
2. Enter the adjustment value of the selected point with
2. Enter the adjustment value of the selected point with
the 10-key and press the [OK] key. (The entered
value is set.)
value is set.)
Display
Min.
Value
Max.
Value
Default
A
POINT1
245
755
500
↓
↓
↓
↓
↓
O
POINT15
245
755
500
46
-16
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the gamma and density. (Monochrome
mode) (The adjustment check pattern is printed.)
mode) (The adjustment check pattern is printed.)
Section
Image process (ICU)
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the adjustment point with the scroll key.
2. Enter the adjustment value of the selected point with
2. Enter the adjustment value of the selected point with
the 10-key and press the [OK] key. (The entered
value is set.)
value is set.)
When the [EXECUTE] key is pressed, the color balance
adjustment check pattern corresponding to the entered
adjustment value is printed.
adjustment check pattern corresponding to the entered
adjustment value is printed.
Display
Min.
Value
Max.
Value
Default
A
POINT1
245
755
500
↓
↓
↓
↓
↓
O
POINT15
245
755
500
46
-19
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to select the half-tone density (gamma) in the auto
exposure mode and to set the auto exposure operation
mode.
exposure mode and to set the auto exposure operation
mode.
Section
Image process (ICU)
Item
Picture quality
Color balance
Operation/
Procedure
Procedure
1. Set the half-tone density (Gamma) with the [MODE1]
key and the [MODE2] key.
2. Set the auto exposure operation mode with [ON] /
[OFF]key.
Display
Set mode
Content
Destination
Default
AE
MODE
MODE
MODE 1
(AUTO 1)
(AUTO 1)
The half-tone density
is higher than that of
AUTO 2 mode.
is higher than that of
AUTO 2 mode.
Japan
Japan:
MODE 1
(AUTO 1)
MODE 1
(AUTO 1)
Except
Japan:
MODE 2
(AUTO 2)
Japan:
MODE 2
(AUTO 2)
MODE 2
(AUTO 2)
(AUTO 2)
The half-tone density
is lower than that of
AUTO 1 mode.
is lower than that of
AUTO 1 mode.
Except
Japan
Japan
Display
Set mode
Content
Default
AE STOP
MODE
MODE
OFF
Auto density (exposure) control is
performed in real time. (The density
level is changed in real time
according to the document pattern.)
performed in real time. (The density
level is changed in real time
according to the document pattern.)
OFF
ON
The density at the tip of a document
is scanned, and the overall density
(exposure) level is determined
according to the density at the tip.
(The overall density level is fixed.)
is scanned, and the overall density
(exposure) level is determined
according to the density at the tip.
(The overall density level is fixed.)
46
-20
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust copy color balance (All color copy mode
gamma/density adjustment) (All color copy mode color
balance/gamma/density are changed.) Same as SIM 46-
21, however, printing is not performed.
gamma/density adjustment) (All color copy mode color
balance/gamma/density are changed.) Same as SIM 46-
21, however, printing is not performed.
Section
Image process (ICU)
Item
Picture quality
Color balance
Operation/
Procedure
Procedure
1. Select the color to be adjusted with the color key (K/
C/M/Y).
2. Select the adjustment point with the scroll key.
3. Enter the adjustment value of the selected point with
3. Enter the adjustment value of the selected point with
the 10-key and press the [OK] key. (The entered
value is set.)
value is set.)
Display
Min.
Value
Max.
Value
Default
A
POINT1
245
755
500
↓
↓
↓
↓
↓
O
POINT15
245
755
500
46
-21
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust copy color balance (All color copy mode
gamma/density adjustment) (All color copy mode color
balance/gamma/density are changed.)
gamma/density adjustment) (All color copy mode color
balance/gamma/density are changed.)
Section
Image process (ICU)
Item
Picture quality
Color balance
Click on the first or last page to see other AR-C260 (serv.man12) service manuals if exist.