Read Sharp AR-C260 (serv.man11) Service Manual online
AR-C260/C260M SETTING AND ADJUSTMENTS 8 - 6
1) Enter the SIM44-2 mode.
2) Press the [EXECUTE] key.
The adjustment is performed automatically. When the adjustment
is completed, the adjustment result is displayed and the the [EXE-
CUTE] key display returns to the original state.
is completed, the adjustment result is displayed and the the [EXE-
CUTE] key display returns to the original state.
If the adjustment is not completed normally, "ERROR" is displayed.
In that case, check the following sections for no abnormality. If there is
any abnormality, repair the part and perform the adjustment again.
any abnormality, repair the part and perform the adjustment again.
In case of an error, the adjustment result is not revised.
• Image density sensor
• PCU PWB
• Transfer belt
When the color image density sensor is adjusted with SIM44-13 and
the black image density sensor is adjusted with SIM44-2, the adjust-
ment with SIM44-36 is not required.
the black image density sensor is adjusted with SIM44-2, the adjust-
ment with SIM44-36 is not required.
In addition, the color image density adjustment jig is not used.
1) Enter the SIM44-36 mode.
2) Press the [EXECUTE] key.
The adjustment is performed automatically. When the adjustment
is completed, the adjustment result is displayed and the the [EXE-
CUTE] key display returns to the original state.
is completed, the adjustment result is displayed and the the [EXE-
CUTE] key display returns to the original state.
If the adjustment is not completed normally, "ERROR" is displayed.
In case of an error, the adjustment result is not revised.
In case of an error, the adjustment result is not revised.
In that case, check the following sections for no abnormality. If there is
any abnormality, repair the part and adjust again.
any abnormality, repair the part and adjust again.
• Image density sensor
• PCU PWB
• Transfer belt
(1) LED print engine image focus adjustment (LED
(writing) unit)
This adjustment must be performed in the following cases:
• When the scanner (writing) unit is replaced.
• When the scanner (writing) unit is removed from the machine.
• When the print image is shifted.
(Especially conspicuous for text and line drawings)
(The scanner (reading) unit is normal, but the print image focus of
the print engine is not normal.)
(The scanner (reading) unit is normal, but the print image focus of
the print engine is not normal.)
• When there is uneven density in the main scanning direction.
• When the color balance adjustment does not result in proper color
matching.
• When in installation or when the installing site is changed. (Neces-
sary depending on the case)
ADJ 2B
Black image density sensor adjustment
Display
Content
Min
Value
Max
Value
Default
value
A
PCS_C
LED ADJ
LED ADJ
Color image density
sensor current
adjustment value
sensor current
adjustment value
1
255
51
B
PCS K
LED ADJ
LED ADJ
Black image density
sensor LED Current
adjustment value
sensor LED Current
adjustment value
1
255
51
C
PCS_K
GAIN
GAIN
Black image density
sensor output gain
(AMP) adjustment value
sensor output gain
(AMP) adjustment value
0
15
0
D
PCS_K
DARK
DARK
Black image density
sensor dark voltage level
sensor dark voltage level
0
255
0
E
PCS_K
GRND
GRND
Black image density
sensor transfer belt
surface detection level
sensor transfer belt
surface detection level
0
255
0
F
BELTMAX
Transfer belt surface
max. detection level
(Black image sensor)
max. detection level
(Black image sensor)
0
255
0
G
BELTMIN
Transfer belt surface
min. detection level
(Black image sensor)
min. detection level
(Black image sensor)
0
255
0
H
BELTDIF
Difference between the
max. value and the min.
value of the transfer belt
surface detection level
(BELTMAX-BELTMIN)
max. value and the min.
value of the transfer belt
surface detection level
(BELTMAX-BELTMIN)
0
255
0
ADJ 2C
Color image density sensor & black
image density sensor adjustment
(Simple adjustment)
image density sensor adjustment
(Simple adjustment)
Display
Content
Min
Value
Max
Value
Default
value
PCS_C
CARB ADJ
CARB ADJ
Color image density
sensor LED current
adjustment target value
sensor LED current
adjustment target value
1
255
108
PCS_C
DARK
DARK
Color image density
sensor dark voltage level
sensor dark voltage level
0
255
0
PCS_C LED
ADJ
ADJ
Color image density
sensor current adjustment
value
sensor current adjustment
value
1
255
51
PCS K LED
ADJ
ADJ
Black image density
sensor LED current
adjustment value
sensor LED current
adjustment value
1
255
51
PCS_K
GAIN
GAIN
Black image density
sensor output gain (AMP)
adjustment value
sensor output gain (AMP)
adjustment value
0
15
0
PCS_K
DARK
DARK
Black image density
sensor dark voltage level
sensor dark voltage level
0
255
0
PCS_K
GRND
GRND
Black image density
sensor transfer belt
surface detection level
sensor transfer belt
surface detection level
0
255
0
BELTMAX
Transfer belt surface max.
detection level (Black
image sensor)
detection level (Black
image sensor)
0
255
0
BELTMIN
Transfer belt surface min.
detection level (Black
image sensor)
detection level (Black
image sensor)
0
255
0
BELTDIF
Difference between the
max. value and the min.
value of the transfer belt
surface detection level
(BELTMAX-BELTMIN)
max. value and the min.
value of the transfer belt
surface detection level
(BELTMAX-BELTMIN)
0
255
0
ADJ 3
Image focus, image skew
adjustment (LED (writing) unit)
adjustment (LED (writing) unit)
Click on the first or last page to see other AR-C260 (serv.man11) service manuals if exist.