AR-C172M (serv.man22). Operation Manual (General Information and Copier Operation) - Sharp Copying Equipment User Guide / Operation Manual. Page 127

To ensure good service from this product over a long period of time, it is recommended that the following
maintenance procedures be performed on a regular basis.

Wipe with a clean, soft cloth.
If necessary, moisten the cloth with water or a small amount of neutral detergent.
When finished, wipe dry with a clean cloth.

If you find that a dirty image results when a copies are made using the reversing single
pass feeder, wipe the original scanning area (the area that contains the long narrow
glass shown at left).

If you find that black (or white) lines appear when you make copies using the reversing single pass feeder, use the
accessory glass cleaning tool to clean the original scanning area.

CAUTION
Do not use flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical
components or the fusing unit inside the machine, fire or electrical shock may result.

When cleaning, do not use thinner, benzene, or similar volatile cleaning agents. These may

degrade or discolour the housing.

Example of dirty print image

Black lines

White lines

ApollonII_general-copy_EX.book  3 ページ  ２００４年９月１６日　木曜日　午前１１時４６分