AR-C172M (serv.man22). Operation Manual (General Information and Copier Operation) - Sharp Copying Equipment User Guide / Operation Manual. Page 126

If an original misfeed occurs in the reversing single pass feeder, follow the steps below to remove the misfed original.

Check locations A, B, and C in the diagram at left to
remove the original.

● Check location A

Open the
document feeding
area cover and
gently remove the
misfed original
from the
document feeder
tray. Close the
document feeding
area cover.

● Check location B

Open the
reversing single
pass feeder and
rotate the two
release rollers in
the direction of
the arrow to make
the original feed
out. Close the
reversing single
pass feeder and
gently remove the
original.

If the misfed
original is small
(such as an A5
original), or if the
misfeed occurred
in the reversing
tray, open the
RSPF right side
cover and gently
remove the
original. Close the
RSPF right side
cover.

● Check location C

Remove the misfed
original from the
exit area.

If the misfed
original cannot be
easily removed
from the exit area,
open the
moveable part of
the document
feeder tray and
remove the
reversing tray and
then remove the
original.

Opening and
closing the cover
clears the misfeed
display. Copying
cannot be
resumed until this
step is performed.

A message may appear indicating the number of
originals which must be returned to the document
feeder tray. Return the originals to the document
feeder tray and press the [START] key for colour or
black and white copying as appropriate for the job
being resumed.

● For misfeed removal in the main unit and other peripheral devices, see page 2-18.
● When a misfeed occurs, touch the [INFORMATION] key to display detailed information for misfeed removal.

Document feeding area cover

Release roller

RSPF right side cover

After removing a misfed original from the exit area, be

sure to attach the reversing tray securely to the exit area.

Reversing tray

ApollonII_general-copy_EX.book  2 ページ  ２００４年９月１６日　木曜日　午前１１時４６分