Read Sharp AR-C170 (serv.man54) User Guide / Operation Manual online
SPECIAL MODES
6-10
3
Indicate whether the front cover sheets
are copied on or not.
are copied on or not.
Select [YES] or [NO] on
the touch panel. If [YES]
is selected, the first page
of the document will be
copied onto the front
cover sheet.
the touch panel. If [YES]
is selected, the first page
of the document will be
copied onto the front
cover sheet.
4
Touch the [OK] key on the COVER setting
screen.
screen.
Return to the SPECIAL MODES screen.
5
Touch the [OK] key on the SPECIAL
MODES screen.
MODES screen.
Return to the main screen of copy mode.
6
Load the cover paper to be used into the
bypass tray.
bypass tray.
Load the same size of
paper as the paper to be
used for the copy job. If
the saddle stitch finisher
is to be used for stapling,
heavy stock cannot be
used for the covers.
(See page 2-10) Paper
within the range of the
stapler must be used.
paper as the paper to be
used for the copy job. If
the saddle stitch finisher
is to be used for stapling,
heavy stock cannot be
used for the covers.
(See page 2-10) Paper
within the range of the
stapler must be used.
B/W reverse
Black and white are reversed in the copy to create a negative image. (This function can only be used for black and
white copying.)
white copying.)
1
Touch the
key to switch to the second
SPECIAL MODES screen.
2
Touch the [B/W REVERSE] key in the
second SPECIAL MODES screen.
second SPECIAL MODES screen.
The [B/W REVERSE] key
will be highlighted to
indicate that the function is
selected. In addition, the
B/W reverse icon (
will be highlighted to
indicate that the function is
selected. In addition, the
B/W reverse icon (
) will
appear in the upper left-
hand corner of the screen.
hand corner of the screen.
3
Touch the [OK] key on the SPECIAL
MODES screen.
MODES screen.
Return to the main screen of copy mode.
OK
CANCEL
PRINT ON FRONT COVER?
YES
NO
About the steps that follow
See pages 5-2 through 5-6.
See pages 5-2 through 5-6.
NOTE
Be sure to place the originals in the document feeder
tray of the reversing single pass feeder.
The document glass cannot be used for this function.
Be sure to place the originals in the document feeder
tray of the reversing single pass feeder.
The document glass cannot be used for this function.
NOTES
● When copying a cover in colour, only one copy can
● When copying a cover in colour, only one copy can
be made, even if a setting is entered for the
number of copies. If you require multiple copies,
reload the original and repeat the copy procedure
as many times as needed.
If "Group" is selected for the copy output mode
when making colour copies, the number of sets
can be selected, however, the copies must be
sorted manually into the correct order.
number of copies. If you require multiple copies,
reload the original and repeat the copy procedure
as many times as needed.
If "Group" is selected for the copy output mode
when making colour copies, the number of sets
can be selected, however, the copies must be
sorted manually into the correct order.
● During cover copying, the stream feeding mode
will not function even if it is turned on by the
program on page 12 of the key operator's guide.
program on page 12 of the key operator's guide.
● During cover copying, the pamphlet copy function
(page 6-25) and the saddle stitch (pamphlet
staple) function (page 3-5) will not operate.
staple) function (page 3-5) will not operate.
To cancel the COVERS function, select the
COVERS function again and touch the [CANCEL]
key (step2).
COVERS function again and touch the [CANCEL]
key (step2).
Original
B/W reverse copy
NOTE
Originals with large black areas (which use a large
amount of toner) can be printed with black/white
reverse to reduce toner consumption.
Originals with large black areas (which use a large
amount of toner) can be printed with black/white
reverse to reduce toner consumption.
TRANSPARENCY
INSERTS
DUAL PAGE
COPY
COPY
B/W
REVERSE
REVERSE
COLOUR
ADJUSTMENTS
About the steps that follow
If a reversing single pass feeder is being used,
see pages 5-2 through 5-6. If the document
glass is being used, see pages 5-7 through 5-9.
If a reversing single pass feeder is being used,
see pages 5-2 through 5-6. If the document
glass is being used, see pages 5-7 through 5-9.
To cancel the B/W reverse function, touch the [B/W
REVERSE] key in the SPECIAL MODES screen (the
screen of step 2).
REVERSE] key in the SPECIAL MODES screen (the
screen of step 2).
ex_apollon_06-1.fm 10 ページ ２００４年６月７日 月曜日 午後４時２分
Click on the first or last page to see other AR-C170 (serv.man54) service manuals if exist.