Read Sharp AR-C170 (serv.man53) User Guide / Operation Manual online
NORMAL COPYING
5-7
5
Copying from the document glass
When copying originals which cannot be fed from the reversing single pass feeder such as thick originals, open the
document cover and copy the originals from the document glass.
document cover and copy the originals from the document glass.
■
■
■
■ 1-sided copies of 1-sided originals
1
Set an original on the document glass.
(page 4-6)
(page 4-6)
[ How to place the original ]
Place the original in the appropriate position shown
below according to its size. (
Place the original in the appropriate position shown
below according to its size. (
Centre the original on
the centring scale.)
2
Ensure that the 1-sided to 1-sided copy
mode is selected.
mode is selected.
The one-sided to one-
sided mode is selected
when no icon for a two-
sided mode appears in
the dashed area on the
display.
sided mode is selected
when no icon for a two-
sided mode appears in
the dashed area on the
display.
3
Ensure that paper of the same size as the
original is automatically selected. (*Note)
original is automatically selected. (*Note)
The selected tray will be
highlighted or the
message "LOAD xxxxxx
PAPER." will appear. If
the message appears,
load paper in a paper
tray with paper of the
required size. Even if the
highlighted or the
message "LOAD xxxxxx
PAPER." will appear. If
the message appears,
load paper in a paper
tray with paper of the
required size. Even if the
message above is displayed, copying can be
performed onto the currently selected paper.
performed onto the currently selected paper.
(*Note) The following requirements must be
satisfied.
satisfied.
Originals of a standard size (A3, B4, A4, A4R, B5,
B5R or A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-
1/2" x 11"R or 5-1/2" x 8-1/2")) are set and the auto
paper select function is enabled.
B5R or A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-
1/2" x 11"R or 5-1/2" x 8-1/2")) are set and the auto
paper select function is enabled.
If originals of a size other
than the sizes above are
to be copied, manually
select the desired paper
size by touching the
[PAPER SELECT] key
and then touching the
desired paper size
selection key.
than the sizes above are
to be copied, manually
select the desired paper
size by touching the
[PAPER SELECT] key
and then touching the
desired paper size
selection key.
The selected key will be highlighted and the paper
selection screen will close. To close the paper
selection screen without making a selection, touch
the [PAPER SELECT] key.
selection screen will close. To close the paper
selection screen without making a selection, touch
the [PAPER SELECT] key.
NOTE
Certain restrictions exist depending on the amount of memory installed and the copy settings. (See "Copy mode
output restrictions" and "Specifications for memory capacity and maximum number of originals" on page 5-4.)
Certain restrictions exist depending on the amount of memory installed and the copy settings. (See "Copy mode
output restrictions" and "Specifications for memory capacity and maximum number of originals" on page 5-4.)
Original
Copy
NOTE
Do not place any objects
under the original size
detector, because they
may damage it or the
original size may not be
detected properly.
Original size detector
R
R
B4 or
8½x14
8½x14
A3 or 11x17
A4 or 8½x11
A4 or
8½x11
8½x11
A5 or
5½x8½
5½x8½
Original scale
Centring scale
Original scale
Centring scale
A3
PLAIN
B5
A4
A4
DUPLEX
A4
ORIGINAL
PAPER SELECT
AUTO A4
100
%
PLAIN
PLAIN
A3
RECYCLED
B4
A4
Apollon_general-copy_EX.book 7 ページ ２００４年６月７日 月曜日 午後１時５９分
Click on the first or last page to see other AR-C170 (serv.man53) service manuals if exist.