AR-C170 (serv.man51). Peripheral devices - Sharp Copying Equipment User Guide / Operation Manual. Page 6

Touch the [Output] key on the main screen of copy mode to display the screen that allows selection of sort, staple
sort, centreline stapling, group function, and the output tray.

When Group is selected, all copies of the same
original will be grouped.

[STAPLE SORT] key (See page 3-4.)

When Staple Sort is selected, sorted sets will be
stapled and delivered to the offset tray. (They will
not be offset stacked.)

When Sort is selected, sets of copies will be
sequentially delivered.

When the offset function is selected, output goes to
the offset tray. (The offset tray is automatically
selected when the staple sort function is turned
on.)

The offset function operates when "Yes" is
selected, and doesn't operate when "No" is
selected. (The offset checkmark is automatically
cleared when the staple sort function is turned on.)

If the centre tray is selected, output paper will be
delivered to the exit tray located above the main
unit.

Touch to close the [OUTPUT] screen and to return
to the main screen.

[SADDLE STITCH] key (See page 3-5.)

When saddle stitching is selected, the copies will
be stapled at the centre and delivered to the saddle
stitch tray.
Touch this key to display the pamphlet copy setting
screen (page 6-25). (This is only possible when a
checkmark appears in the checkbox of the
[AUTOMATIC SADDLE STITCH] key operator
program (see page 12 of the Key operator's
guide.))

If the saddle stitch finisher is equipped with a hole
punch module, printed paper can be hole punched
and delivered to the offset tray.

* When one of the functions is selected, it is

highlighted.

OUTPUT

OK

SADDLE

STITCH

PUNCH

FINISHER

TRAY

CENTRE

TRAY

STAPLE

SORT

SORT

GROUP

OFFSET

Apollon_general-copy_EX.book  6 ページ  ２００４年６月７日　月曜日　午後１時５９分