Read Sharp AR-C170 (serv.man51) User Guide / Operation Manual online
SADDLE STITCH FINISHER
3-3
3
*1
Multiple punch modules cannot be installed together. Some models may not be available in some regions.
*2
With AR-PN1B, two or three holes can be punched depending on the paper size.
*3
With AR-PN1C and AR-PN1D, the number of holes is the same. The hole interval, however, is not the same.
Specifications are subject to change for improvement without notice.
Supplies
AR-SC2 staple cartridges must be used for this finisher.
The cartridge package contains three cartridges of approximately 5000 staples
each.
The cartridge package contains three cartridges of approximately 5000 staples
each.
Staple
Allowed paper sizes for stapling
Upper tray: A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13",
Upper tray: A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11", 8-1/2" x 11"R
Lower tray: A3, B4, A4R, 11" x 17", 8-1/2" x 11"R
Maximum number of sheets for stapling
See "Staple sort mode" on the next page
See "Staple sort mode" on the next page
Stapling positions
Upper tray: 3 locations (1 position back, 1 position front, 2 positions centre)
Lower tray: 120 mm (4-47/64") pitch from centre of paper
Upper tray: 3 locations (1 position back, 1 position front, 2 positions centre)
Lower tray: 120 mm (4-47/64") pitch from centre of paper
Saddle stitch
Maximum of 10 sheets can be stapled (80 g/m
2
or 21 lbs.)
Paper size: A3, B4, A4R, 11" x 17", 8-1/2" x 11"R
Paper weight: 64 to 105 g/m
Paper weight: 64 to 105 g/m
2
or 17 to 28 lbs.
Power supply
Supplied from machine (Stand / paper drawer)
Dimensions
633mm(W) x 603mm(D) x 771mm(H) (24-59/64" (W) x 23-3/4" (D) x 30-23/64" (H))
Weight
Approximately 36kg (79.4lbs.)
Overall dimensions when
attached to machine
attached to machine
1432mm(W) x 676mm(D) (when tray is extended)
Remarks
Paper output
Upper tray: Supports both face-up and face-down output Lower tray: Face-down output only
Paper full detection
Both upper and lower tray
Offset function
Upper tray only (offset function not possible for A3W, A5R, 12" x 18" and
5-1/2" x 8-1/2"R size paper)
5-1/2" x 8-1/2"R size paper)
Paper conveying
Centre reference
Name
Punch module
Model*
1
AR-PN1A
AR-PN1B*
2
AR-PN1C*
3
AR-PN1D*
3
Number of holes
2
3 or 2
4
4
Paper sizes for hole
punching
punching
11"x17", 8-1/2"x14",
8-1/2"x13",
8-1/2"x11",
8-1/2"x11"R, A3, B4,
A4, A4R, B5, B5R
8-1/2"x13",
8-1/2"x11",
8-1/2"x11"R, A3, B4,
A4, A4R, B5, B5R
3 holes: 11" x 17",
8-1/2" x 11", A3, A4
2 holes: 8-1/2"x14",
8-1/2" x 11"R
8-1/2" x 11", A3, A4
2 holes: 8-1/2"x14",
8-1/2" x 11"R
A3, A4
11"x17", 8-1/2"x14",
8-1/2"x13",
8-1/2"x11",
8-1/2"x11"R, A3, B4,
A4, A4R, B5, B5R
8-1/2"x13",
8-1/2"x11",
8-1/2"x11"R, A3, B4,
A4, A4R, B5, B5R
Power supply
Supplied from machine saddle stitch finisher
Dimensions
95mm(W) x 560mm(D) x 170mm(H) (3-3/4" (W) x 22-1/16" (D) x 6-45/64" (H))
Weight
Approximately 2.5kg (5.6lbs.)
NOTES
● Transparency film, envelopes, postcards, and other special papers cannot be stapled.
● If mixed paper sizes are selected for stapling jobs, stapling will be automatically cancelled.
● Transparency film, envelopes, postcards, and other special papers cannot be stapled.
● If mixed paper sizes are selected for stapling jobs, stapling will be automatically cancelled.
Apollon_general-copy_EX.book 3 ページ 2004年6月7日 月曜日 午後1時59分
Click on the first or last page to see other AR-C170 (serv.man51) service manuals if exist.