AR-C170 (serv.man50). Managing the machine - Sharp Copying Equipment User Guide / Operation Manual. Page 5

NOTES
● Be sure to load A6R paper, A5 paper, 5-1/2" x 8-1/

2" paper, and postcards as shown in the diagram
below.

A6R paper, post cards.
A5 paper, 5-1/2" x 8-1/2" paper.

● When loading plain paper other than paper

recommended for colour, SHARP standard paper,
special media other than postcards, SHARP-
recommended transparency film, or paper to be
printed on the back, the paper must be loaded one
sheet at a time. Loading more than one sheet at a
time will cause misfeeds.

● Before loading heavy paper, straighten any curling

in the paper.

● When adding paper, remove any paper remaining

in the tray, combine it with the paper to be added,
and reload as a single stack.

● Do not use paper that has already been printed on

by a plain paper fax machine or a laser printer.
This may cause printed images to become dirty.

● When printing on transparency film, be sure to

remove each sheet as it exits the machine.
Allowing sheets to stack in the output tray may
cause curling.

● Use only SHARP-recommended transparency

film. Insert the film so that the rounded corner is on
the left for horizontal loading, or on the right for
vertical loading.

● When loading multiple sheets of transparency film

in the bypass tray, fan the sheets several times
before loading.

Horizontal
loading

Vertical
loading

Apollon_general-copy_EX.book  5 ページ  ２００４年６月７日　月曜日　午後１時５９分