Read Sharp AR-C170 (serv.man31) Service Manual online
AR-C170M PRINTER CONTROLLER SECTION 14 - 16
6) Refer to the printed test pattern, and select the desired color
phase (Gray level).
7) Set the adjustment point corresponding to the color phase
(Gray level) selected in procedure 6) on the adjustment menu.
Operating procedures
Touch the
,
,
and
keys to select the desired
color of gray.
8) Press the OK key. (The adjustment values are set.)
(3) Color balance adjustment result check
1) Enter the key operator program mode.
2) Select "Printer setting."
3) Select "Color adjustments."
4) Select the test print.
5) The display below is shown. Select A4 or 8.5" x 11" size
paper, and press the EXECUTE key.
The test pattern for the color balance adjustment is printed.
6) Check that each patch density on the printed test chart is at
the center of the Lower Limit and the Upper limit of the test
chart (UKOG-0305FCZZ).
chart (UKOG-0305FCZZ).
KEY OPERATOR PROGRAMS
EASY CALIBRATION
KEY OPERATOR PROGRAMS
EXECUTE
TEST PRINT
SELF PRINT IN PROGRESS
C
M
Y
Bk
Low Density
Mid Density
High Density
C
M
Y
Bk
C
M
Y
Bk
Low Density
Mid Density
High Density
C
M
Y
Bk
Low Density
Mid Density
High Density
C
M
Y
Bk
C
M
Y
Bk
AR-C260 Color Chart
Lower
Limit
Limit
Upper
Limit
Limit
Click on the first or last page to see other AR-C170 (serv.man31) service manuals if exist.