Read Sharp AR-BD14 (serv.man5) Service Manual online
B. Other country
Recommendable NIC board: JX96NC-E8
1. Remove the unction PWB and the connector cover plate from the
printer junction board unit.
2. Install the network board.
Set the screw to the top
of the long hole and fix it.
of the long hole and fix it.
3. Connect the network board connector with the junction PWB con-
nector, and fix the junction PWB with the fixing screw.
[6] INSTALLATION OF EXPANSION
RAM (SIMM)
(1) Recommendable RAM (SIMM)
When additional memory is installed:
•
I/O buffer capacity increase
→
The leaving time of the PC may be
increased.
•
Page buffer capacity increase
→
The development speed when
printing during copying can be increased.
Only one RAM can be additionally installed.
Use a commercially available RAM.
Capacity
Number
of Pins
Access
Time
Function
Parity
16 MB
72 pin
60 n sec
EDO (Hyper Page),
Fast Page
None
The following RAM’s or their equivalent are recommendable.
Capacity
Maker
Type
16 MB
NEC
MC-424000F32-60
MC-424000A32-60
MC-424000A32-60
Toshiba
THM324005CS/CSG-60
THM324000CS/CSG-60
THM324000CS/CSG-60
Hitachi
HB56U432B/SB-6BN
HB56A432BR/SBR-6B
HB56A432BR/SBR-6B
(2) Installation
Unplug the copier’s power cord before carrying out
the following procedure.
the following procedure.
1. Remove the right side panel of the copier.
Open the front cover and toner collecting container cover.
Remove the three screws which secure the right side panel, open the
manual feed tray and side cover, and remove the right side panel.
manual feed tray and side cover, and remove the right side panel.
Printer junction
board unit
board unit
Junction PWB
Connector cover plate
Junction PWB
Network board
(JX96NC-E8)
Right side panel
Front cover
Manual feed tray
Toner collecting
container cover
container cover
Screws
Side cover
Screws
– 10 –
Click on the first or last page to see other AR-BD14 (serv.man5) service manuals if exist.