AR-AX1 (serv.man9). AXIS 700-001 Installing the AXIS 700 Scan Server and Scanning directly to a web browser - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

Sharp Electronics (UK) Ltd., NIS Systems Support

NIS Bulletin 009.doc

Page:  3 of 4

•

 Use the up and down arrows on the AXIS 700 to increase or decrease each highlighted digit as

required.  Press the Menu key on the Scan Server to move to another digit.  Continue until the
entire IP address has been entered.

•

 Press the Enter key to confirm the changes made to the IP address. Press the Menu key to

display the node address.  The node address is not editable and is the same as the serial number
on the AXIS 700.  Press the Menu key to get to the final screen and then press the Enter key to
finish the address settings.

When the Status LED stops flashing and remains off, the AR-AX700 is ready to use.

Note:  If a mistake is made during the address set-up, press the Cancel key to cancel the previous
operation.

The AXIS 700 by default allows a user to scan a document directly to their Web browser. Follow the
steps below to scan directly to your web browser.

•

 Place the document to be scanned on the glass or in the document feeder of the copier.

•

 Open the Web browser and enter the IP address that is set in the AXIS 700 scan server.

•

 You should now have a connection to the AXIS scan server similar to the screen shot below.

•

 Select the desired Scanning Profile from the drop down list. Custom profile settings can also be

made by selecting Custom and setting your desired parameters.