AR-AX1 (serv.man9). AXIS 700-001 Installing the AXIS 700 Scan Server and Scanning directly to a web browser - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Sharp Electronics (UK) Ltd., NIS Systems Support

NIS Bulletin 009.doc

Page:  2 of 4

The AXIS 700 has DHCP enabled as default. If a DHCP server is configured on the network, the AXIS
scan server will obtain an IP Address automatically.
If no DHCP server is available, an IP Address will need to be assigned manually. This can be done
through numerous methods including the following:

•

 Press the Menu key on the AXIS 700 and after a few moments the display will show:

IP address:

000.000.000.000

•

 Press the Enter key on the AXIS 700 and the display will show:

Edit IP address:

000.000.000.000

•

 Use the up and down arrows on the AXIS 700 to increase or decrease each highlighted digit as

required.  Press the Menu key on the Scan Server to move to another digit.  Continue until the
entire IP address has been entered.

•

 Press the Enter key to confirm the changes made to the IP address.  Then press the Menu key to

move to the default router address setting screen.

Default router:

000.000.000.000

•

 Press the Enter key on the Scan Server to get to the edit screen for the default router IP address.

Edit router:

000.000.000.000

•

 Use the up and down arrows on the AXIS 700 to increase or decrease each highlighted digit as

required.  Press the Menu key on the Scan Server to move to another digit.  Continue until the
entire IP address has been entered.

•

 Press the Enter key to confirm the changes made to the IP address.  Then press the Menu key to

move to the subnet mask setting screen.  Press Enter and edit the address as before.

Net mask:

000.000.000.000